Frame Vibration Suppression Method for Sensorless PMSM Drive Applications
نویسندگان
چکیده
This study proposes a novel frame anti-vibration controller for position sensorless PMSM drive application. This controller is called specific component reduction controller (SCRC). SCRC can function without an accelerometer and can achieve speed variable control. This study mainly comprises the following phases. First, the position sensorless control method will be provided. Second, the frame vibration model and load torque ripple will be shown. Third, SCRC will be discussed and its stability will be analyzed. Finally, experimental results show that SCRC can achieve speed variable anti-vibration control and compensate target frequency torque ripple.
منابع مشابه
Speed Sensorless Direct Torque Control of a PMSM Drive using Space Vector Modulation Based MRAS and Stator Resistance Estimator
This paper presents a speed sensorless direct torque control scheme using space vector modulation (DTC-SVM) for permanent magnet synchronous motor (PMSM) drive based a Model Reference Adaptive System (MRAS) algorithm and stator resistance estimator. The MRAS is utilized to estimate speed and stator resistance and compensate the effects of parameter variation on stator resistance, which makes fl...
متن کاملExtended Kalman Filter for Sensorless Fault Tolerant Vector Control of PMSM with stator resistance estimation
This paper aims to provide a high performance sensorless control based on an Extended Kalman Filter (EKF) applied to fault-tolerant PMSM drive system with statorresistance estimation. It proposes a fast method of fault switches detection in the power converters. The considered drive is composed of three phases PMSM and a four leg three phase’s inverter when the fourth is the redundant leg. Afte...
متن کاملAn Adaptive Nonlinear Controller for Speed Sensorless PMSM Taking the Iron Loss Resistance into Account (RESEARCH NOTE)
In this paper, an adaptive nonlinear controller is designed for rotor Surface Permanent Magnet Synchronous Motor (SPMSM) drive on the basis of Input-Output Feedback Control (IOFC), and Recursive Least Square (RLS) method. The RLS estimator detects the motor electromechanical parameters, including the motor iron loss resistance online. Moreover, a Sliding-Mode (SM) observer is developed for onli...
متن کاملInitial Rotor Position Estimation and Sensorless Direct Torque Control of Surface Mounted Permanent Magnet Synchronous Motors Considering Saturation Saliency
For a p ractical direct torque controlled (DTC) permanent magnet synchronous motor (PMSM) drive system, the information of the initial rotor position, which is usually obtained by a mechanical position sensor, is essential for starting under the full load. In order to avoid the disadvantages of using mechanical position sensors, great efforts have been made on the development of sensorless cont...
متن کاملTuning of Extended Kalman Filter using Self-adaptive Differential Evolution Algorithm for Sensorless Permanent Magnet Synchronous Motor Drive
In this paper, a novel method based on a combination of Extended Kalman Filter (EKF) with Self-adaptive Differential Evolution (SaDE) algorithm to estimate rotor position, speed and machine states for a Permanent Magnet Synchronous Motor (PMSM) is proposed. In the proposed method, as a first step SaDE algorithm is used to tune the noise covariance matrices of state noise and measurement noise i...
متن کامل