1 A pr 2 01 7 Foam Au driven by 4 ω - 2 ω ignition laser pulse for inertial confinement fusion

نویسنده

  • Peng Song
چکیده

Green light (2ω) has the potential to drive ignition target for laser fusion with significantly more energy than blue light (3ω) and a relatively higher damage threshold for the optic components in the final optic assembly, but it has issues of a relatively low laser to x-ray conversion efficiency and a hard x-ray spectrum as compared to 3ω. In this paper, we propose to drive a foam hohlraum wall with an ignition laser pulse by taking a 4ω laser at the pre-pulse and a 2ω laser at the main-pulse, called as 4ω 2ω ignition pulse. This novel design has the following advantages: (1) benefiting from 2ω of its relatively high energy output and low damage threshold during main-pulse; (2) benefiting from foam in its relatively high laser to x-ray conversion efficiency and relatively low M-band fraction in re-emission; (3) benefiting from 4ω of its low LPI during pre-pulse. From our 1D simulations with Au material, the laser to x-ray conversion in a foam driven by 4ω 2ω pulse has an increase of 28% as compared to a solid target driven by 3ω with the same pulse shape. The relatively thin optical depth of foam is one of the main reasons for the increase of laser to x-ray conversion efficiency inside a foam target.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Maximization of Inertial Confinement Fusion Yields through Laser Pulse Optimization

A method has been developed for the optimization of high-gain inertial confinement fusion targets. Using this method, software simulations have yielded pulse shapes that produce high fusion gain and demonstrate good target stability using a 1 megaJoule (MJ) laser source. These pulse shapes could help attain ignition on the National Ignition Facility inertial confinement fusion system. Introduct...

متن کامل

افروزش سریع- شوکی رهیافتی نوین برای همجوشی محصور سازی اینرسی

 A new concept for inertial confinement fusion called fast-shock ignition (FSI) is introduced as a credible scheme in order to obtain high target gain. In the proposed model, the separation of fuel ignition into two successive steps, under the suitable conditions, reduces required ignitor energy for the fuel ignition. The main procedure in FSI concept is compressing the fuel up to stagnation. T...

متن کامل

Novel free-form hohlraum shape design and optimization for laser-driven inertial confinement fusion

Articles you may be interested in Optimized beryllium target design for indirectly driven inertial confinement fusion experiments on the National Growth of pellet imperfections and laser imprint in direct drive inertial confinement fusion targets The hohlraum shape attracts considerable attention because there is no successful ignition method for laser-driven inertial confinement fusion at the ...

متن کامل

Inverse Braking Radiation and Resonance Absorption in Corona Plasmas of Inertial Confinement Fusion

Abstract: In this paper, combining the Maxwell equations with the electron balanceequation, we obtain the inverse braking radiation absorption coefficient in a laser fusioncorona plasma. For a fixed plasma temperature, variations of the absorption coefficientversus the penetration depth into the plasma are illustrated numerically for differentvalues of laser wavelength. ...

متن کامل

Spherical Strong-Shock generation for Shock-ignition inertial fuSion

LLE Review, Volume 141 48 Introduction Shock ignition (SI)1–5 is an advanced concept in inertial confinement fusion (ICF)6 that is very promising and has the potential to provide significantly higher gains than conventional hot-spot ignition.7 SI is a two-step process where the fuel compression and ignition phases are separated by applying a highly shaped laser pulse with a duration of several ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2017