Direct Torque Measurement of Hermetic Rotary Compressors Using Strain Gauge
نویسندگان
چکیده
منابع مشابه
CAE Approach to the Development of Rotary Compressors
This paper describes the computer aided engineering (CAE) approach to in,estigate the vibration of rolling piston type rotary compressors in the design and analysis stages. At first, the optimum design procedure for the compressor and piping system is presented. Then ,a compressor data base used for a dynamic simulation of the royary compressors are carried out. Finally, a practical application...
متن کاملEstimation, of the Starting Torque, of Refrigerant Rotary Compressors
Estimation of starting torque is very important for motor design and for improvement in compressor efficiency. Especially, when compressors are restarted after a period of inoperation, motors sometimes meet large starting torque. The assumed reasons are as follow . The compressors temperature is sometimes lower than any other parts of the refrigerant cycle. In this case, the refrigerant tends t...
متن کاملDynamic Rotary Torque Measurement Using Surface Acoustic Waves
This paper identifies a new, potentially low cost, non-contact, frequency domain strain torque sensor utilising SAW (Surface Acoustic Wave) Technology for surface strain measurement. The sensor has a short axial length making it flexible in terms of integration into a variety of applications, encompassing both static and dynamic measurement. The paper presents a technical description of the res...
متن کاملPerformance Comparison of Single-stage and Two-stage Hermetic Rotary CO2 Compressor
As a natural refrigerant, CO2 gets more and more attention in recent years. The CO2 system runs at a trans-critical cycle. This leads to a high running pressure and high pressure difference for the CO2 compressor. In this paper the single stage and two stage rolling piston compressors with same displacement have been developed for CO2 heat pump water heater. And a comprehensive performance comp...
متن کاملDevelopment of Hermetic Carbon Dioxide Compressor
This study, which developed a laboratory prototype of a hermetic C02 compressor, was motivated by three primary factors. First, the C02 cycle is important because of global concern about ozone depletion and global wanning. Second, the leak tightness, efficiency, size and weight of hermetic motor-driven compressors make them preferable to open-type compressors for conventional residentiallcommer...
متن کامل