Autonomic healing of low-velocity impact damage in fiber-reinforced composites
نویسندگان
چکیده
In this study autonomic self-healing of impact damage in composite materials is shown using a microencapsulated healing agent. The components for self-healing, urea–formaldehyde microcapsules containing dicyclopentadiene (DCPD) liquid healing agent and paraffin wax microspheres containing 10 wt% Grubbs’ catalyst, have been successfully incorporated in a woven S2-glass-reinforced epoxy composite. Lowvelocity impact tests reveal that the self-healing composite panels are able to autonomically repair impact damage. Fluorescent labeling of damage combined with image processing shows that total crack length per imaged cross-section is reduced by 51% after self-healing. A testing protocol based on compression after impact reveals significant recovery of residual compressive strength (RCS) in self-healing panels. Self-healing panels show a higher threshold impact energy before RCS reduction, and as impact energy increases, RCS recovery decreases. Qualitative inspection shows that crack separation increases with increasing impact energy, indicating that self-healing performance depends on the ability to adequately fill damage volume. ! 2009 Elsevier Ltd. All rights reserved.
منابع مشابه
Finite Element Analysis of Low Velocity Impact on Carbon Fibers/Carbon Nanotubes Reinforced Polymer Composites
An effort is made to gain insight on the effect of carbon nanotubes (CNTs) on the impact response of carbon fiber reinforced composites (CFRs) under low velocity impact. Certain amount of CNTs could lead improvements in mechanical properties of composites. In the present investigation, ABAQUS/Explicit finite element code (FEM) is employed to investigate various damages modes of nano composites ...
متن کاملAccuracy Assessment of Ultrasonic C-scan and X-ray Radiography Methods for Impact Damage Detection in Glass Fiber Reinforced Polyester Composites
The present study introduces two quantitative parameters to compare the accuracy of ultrasonic C-scan testing and X-ray radiography methods in the damaged area detection under low-velocity impact in polymer-based composites. For this purpose, the hand lay-up technique of composite processing was employed to prepare the composite specimen. A composite specimen consisting of the glass fiber reinf...
متن کاملDamage Assessment in Glass Fiber-Epoxy Matrix Composite under High Velocity Impact of Ice
This study investigated the influence of nanoclay on the impact damage resistance of glass fiber-epoxy composites under high velocity ice impact loading. Addition of 0.5 wt. % nanoclay into epoxy was shown to improve damage resistance compared to composite plates having no nanoclay platelet. The glass fiber-epoxy composites containing nanoclay brought about substantial improvement in ice impact...
متن کاملAn experimental investigation of novel hybrid epoxy/glass fibers nanocomposite reinforced with nanoclay with enhanced properties for low velocity impact test
The application of nanoparticles in order to enhance the composites properties has been recently attracted many researchers' attentions. To increase the mechanical and physical properties of the composites, the nanoparticles have no significant effect on the weight and nanostructure of composites. One of the well-known nanoparticles is the Nanoclay (NC) that have been widely used in industries ...
متن کاملProgressive Damage of Randomly Oriented Short Fiber Reinforced Composites
Recently, short fiber reinforced composites are widely utilized in many structural parts in automobile, infrastructure and electric equipment applications due to their high specific strength, high specific stiffness, long fatigue life and high impact resistance as well as cost effective capability of production. If these parts are exposed to low-velocity impact, significant damages may develop ...
متن کامل