Identification–Oriented Control Designs with Application to a Wind Turbine Benchmark
نویسندگان
چکیده
Wind turbines are complex dynamic systems forced by stochastic wind disturbances, gravitational, centrifugal, and gyroscopic loads. Since their aerodynamics are nonlinear, wind turbine modelling is thus challenging. Therefore, the design of control algorithms for wind turbines must account for these complexities, but without being too complex and unwieldy. Therefore, the main contribution of this study consists of providing two examples of robust and viable control designs with application to a wind turbine simulator. Due to the description of the considered process, extensive simulations of this test case and Monte–Carlo analysis are the tools for assessing experimentally the achieved features of the suggested control schemes, in terms of reliability, robustness, and stability, in the presence of modelling and measurement errors. These developed control methods are finally compared with different approaches designed for the same benchmark, in order to evaluate the properties of the considered control techniques. Keywords—control algorithms; fuzzy modelling and control; recursive estimation; adaptive PI controllers; wind turbine model.
منابع مشابه
Data–Driven Design of a PI Fuzzy Controller for a Wind Turbine Simulated Model
This paper proposes a fuzzy modelling and identification approach oriented to the design of a PI fuzzy controller for regulating both the pitch angle and the reference torque of a wind turbine model. This strategy has been suggested for enhancing the regulator design that could represent an alternative to the standard switching controller, already implemented in the wind turbine test system. Th...
متن کاملImprovement Performances of Active and Reactive Power Control Applied to DFIG for Variable Speed Wind Turbine Using Sliding Mode Control and FOC
This paper deals with the Active and Reactive Power control of double-fed induction generator (DFIG) for variable speed wind turbine. For controlling separately the active and the reactive power generated by a DFIG, field oriented control (FOC) and indirect sliding mode control (ISMC) are presented. These non linear controls are compared on the basis of topology, cost, efficiency. The main cont...
متن کاملResidual Generator Fuzzy Identification for Wind Farm Fault Diagnosis
In the recent years the wind turbine industry has focused on optimising the cost of energy. One of the important factors in the achievement of this task consists of increasing the reliability of the wind turbines, which can be obtained using advanced fault detection and isolation strategies. Clearly, most faults are managed quite easily at a wind turbine control level. However, some faults are ...
متن کاملFuzzy gain-scheduled active fault-tolerant control of a wind turbine
Advanced fault detection and accommodation schemes are required for ensuring efficient and reliable operation of modern wind turbines. This paper presents a novel approach in designing a fault detection and diagnosis (FDD) and fault-tolerant control (FTC) scheme for a wind turbine using fuzzy modeling, identification and control techniques. First, an improved gain-scheduled proportional-integra...
متن کاملOn the development of a sliding mode observer-based fault diagnosis scheme for a wind turbine benchmark model
This paper addresses the design of an observer-based fault diagnosis scheme, which is applied to some of the sensors and actuators of a wind turbine benchmark model. The methodology is based on a modified sliding mode observer (SMO) that allows accurate reconstruction of multiple sensor or actuator faults occurring simultaneously. The faults are reconstructed using the equivalent output err...
متن کامل