Work in Progress - Undergraduate Research in Power Electronics - The Super Barrier Rectifier Diode Project
ثبت نشده
چکیده
This paper presents an undergraduate student research project which involved a new power diode called the Super Barrier Rectifier (SBR) diode. Several projects incorporating SBR diodes in dc-dc converters performed by undergraduate students will be described. Challenges in conducting these projects along with results will also be discussed. Index Terms – Undergraduate research.
منابع مشابه
A Conformal 10 GHz Rectenna for Wireless Powering of Piezoelectric Sensor Electronics
This paper presents the design, implementation and characterization of a rectenna array for wireless powering of sensor electronics for airframe fatigue detection. The rectenna aperture is powered 5 minutes at a time during inspection with a requirement of ±15V at 100mW. The maximum incident RF power is 10mW/cm. A single rectenna element at this incident power density has an output power of 5 m...
متن کاملModeling of a Rectifier Connected PMSG Applied in Wind Energy Conversion System Using State Machine Approach
Accurate modeling of the wind energy conversion system is necessary to design and implementation of the control loop for the generator and the frequency converter, in order to extract maximum power from the wind and to investigate the effects of interconnection between wind farms and power system. In this paper the combination of a permanent magnet synchronous generator loaded with a diode rect...
متن کاملWind energy conversion system based on Vienna rectifier with fuzzy logic control technique
Meenakumari.S Department of Electrical and Electronics Engineering,Er.Perumal Manimekalai College of Engineering, Hosur, India Abstract— In this project, a near-unity-power-factor front-end rectifier employing two current control methods, namely, average current control and hysteresis current control, is considered. This rectifier is interfaced with a fixed-pitch wind turbine driving a permanen...
متن کاملModeling of a Rectifier Connected PMSG Applied in Wind Energy Conversion System Using State Machine Approach
Accurate modeling of the wind energy conversion system is necessary to design and implementation of the control loop for the generator and the frequency converter, in order to extract maximum power from the wind and to investigate the effects of interconnection between wind farms and power system. In this paper the combination of a permanent magnet synchronous generator loaded with a diode rect...
متن کاملNew Bridgeless DCM Sepic PFC Rectifier with Low Conduction and Switching Losses
New bridgeless single-phase ac–dc power factor correction (PFC) rectifier based on Sepic topology is proposed. The absence of an input diode bridge and the presence of only two semiconductor switches in the current flowing path during each switching cycle result in less conduction losses and improved thermal management compared to the conventional Sepic PFC converter. The proposed topology is d...
متن کامل