SPE 38653 A Procedure to Integrate Well Test Data , Reservoir Performance History and 4 - D Seismic Information into a Reservoir

This paper was selected for presentation by an SPE Program Committee following review of information contained in an abstract submitted by the author(s). Contents of the paper, as presented, have not been reviewed by the Society of Petroleum Engineers and are subject to correction by the author(s). The material, as presented, does not necessarily reflect any position of the Society of Petroleum Engineers, its officers, or members. Papers presented at SPE meetings are subject to publication review by Editorial Committees of the Society of Petroleum Engineers. Electronic reproduction, distribution, or storage of any part of this paper for commercial purposes without the written consent of the Society of Petroleum Engineers is prohibited. Permission to reproduce in print is restricted to an abstract of not more than 300 words; illustrations may not be copied. The abstract must contain conspicuous acknowledgment of where and by whom the paper was presented. Abstract This paper deals with the problem of estimating the distributions of permeability and porosity in heterogeneous and multiphase petroleum reservoirs by matching the dynamic behavior. The dynamic data is in the form of field measurements from well testing, production history, interpreted 4-D seismic information, and other data such as correlations between permeability and porosity, geostatistics in the form of a variogram model and the inference of large scale geological structure. The issue was posed as an inverse problem and solved by using nonlinear parameter estimation. The procedure developed here is capable of processing all the information simultaneously and this results in a fast and efficient method. The procedure is also able to determine the uncertainty associated with the estimated permeability and porosity fields. Examples of different parameter types that may be estimated by this approach include: (a) individual block permeabilities and porosities; (b) geological objects such as channels and faults; (c) pilot points that form the basis of a kriged distribution; and (d) seismic attenuation values from 3-D seismic images. An important conclusion of this work is that the value of each piece of information does not reside in its isolated use but in the value it adds to integrated analysis of the complete set of information. Thus data that traditionally was considered to be of low information content for reservoir characterization becomes useful and enhances the value of the data set as a whole. Introduction Devising the optimal strategy for the development of an oil or gas reservoir is an …