Digital Simulation of SISO-ZVS-Push pull Quasi Resonant Converter for Different Loads
نویسنده
چکیده
Resonant switching DC-DC converters are currently replacing hard switched converters for power supply in many applications due to their divergent advantages such as high efficiency, high frequency operation, compact structure, low EMI, etc. The paper deals with the design and simulation of SISO ZVS Pushpull converter for R, RL, RLE and DC servo drive using MATLAB/ Simulink in half wave mode. The salient feature of ZVS is that the switching devices is switched on at zero voltage , so that switching losses are zero, switching stresses and volumes are reduced and power density is increased. These features increases the efficiency of the converter applied for robotic applications. The centre tapped transformer of the pushpull converter also functions as an isolation device between the source and the load. Keywords— Quasi resonant converter (QRC), Zero voltage switching (ZVS), Zero current switching (ZCS), Single input single output
منابع مشابه
Pv Water Pumping System Using a Current-fed Parallel Resonant Push-pull Inverter for Rural Areas Applications
This paper presents the analysis of a water pumping system from photovoltaic cells using a currentfed parallel resonant push-pull inverter, for residential applications in rural areas. The structure of the power circuit is particularly simple and robust. It works in a ZVS commutation. Its main features are: one power processing stage, simple control strategy, low harmonic distortion of the load...
متن کاملDesign of Quasi Resonant Boost Converter Using Zero Current Switching With Push Pull Technology
In this project reduced switching losses and high efficiency is proposed for quasi resonant converter. An AC/DC quasi resonant converter with push pull topology is coupled to two distributed boost inductors into a single magnetic core which hereby reducing the circuit volume and the cost are the development targets of switching power supply today. The quasi resonant converter has ideally zero s...
متن کاملA Zvs - Pwm Three - Phase Current - Fed Push – Pull Dc – Dc Converter in Microgrids
In this paper, a ZVS-PWM threephase current-fed push–pull dc–dc converter is proposed. When compared to single-phase topologies, the three-phase dc–dc conversion increases the power density, uses the magnetic core of the transformer more efficiently, reduces the stress on switches, and requires smaller filters since the frequency for its design is higher. The proposed converter employs an activ...
متن کاملAnalytical calculation of resonant inductance for zero voltage switching in phase-shifted full-bridge converters
The phase shift full bridge (PSFB) converter allows high efficiency power conversion at high frequencies through zero voltage switching (ZVS); the parasitic drain-to-source capacitance of the MOSFET is discharged by a resonant inductance before the switch is gated resulting in near zero turn-on switching losses. Typically, an extra inductance is added to the leakage inductance of a transformer ...
متن کاملA New Zero-Voltage-Switching Push-Pull Converter
A soft switching three-transistor push-pull(TTPP)converter is proposed in this paper. The 3rd transistor is inserted in the primary side of a traditional push-pull converter. Two primitive transistors can achieve zero-voltage-switching (ZVS) easily under a wide load range, the 3rd transistor can also realize zero-voltage-switching assisted by leakage inductance. The rated voltage of the 3rd tra...
متن کامل