Determining Position Inside Non-industrial Buildings Using Ultrasound Transducers

نویسندگان

  • Francesc Escudero
  • Jordi Margalef
  • Sonia Luengo
  • Maria Alsina
  • Josep M. Ribes
  • Juan Pérez
چکیده

The position determination inside a building where no GPS signal is beingreceived can be ascertained using laser transmitters in industrial situations where there areno people or using triangulation of the signal strength, normally electro-magnetic signals,if the required accuracy is more than a metre. Our solution is aimed at situations wherepeople are present and where the required accuracy is less than 30 cm, such as in shoppingprecincts or supermarkets. To achieve this, a network of ultrasonic transmitters is fittedinto the ceiling which receives a synchronised time signal. Each transmitter has a uniqueidentifier code and emits its code with a delay with respect to the common time signalwhich is proportional to its code number with an ASK modulation over the ultrasonic bandcentred on 40 KHz. The receivers circulating beneath the transmitters receive the codes ofthose within their detection range, translate the time delays into distances and then obtaintheir position by triangulation since the receivers know the position of every transmitter.Since the receivers are not synchronised with the common time signal or the actual speedof the sound, whose value varies appreciably with temperature, relative humidity andatmospheric pressure, a consecutive approximation algorithm has been introduced. This isbased on the fact that the Z coordinator of the receiver is known and constant and thus it is possible, with only three different identifiers received, to deduce the phase of the common time signal and estimate the speed of the sound with a fourth identifier.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Numerical Analysis of an Ultrasonic Technology for Food Dehydration Process Intensification

Industrial processes assisted by highpower ultrasound have become an attractive field for industries because of its sustainability (low energy consumption, non-pollutant processes) and efficiency. Among these processes we can find food dehydration aided by ultrasound, based on the proper exploitation of the non-linear effects associated to finite-amplitude-wave propagation that are able to enha...

متن کامل

Single Crystal Piezoelectric Composite Transducers for Ultrasound NDE Applications

Single crystal piezoelectric composite transducers including 75 MHz PC-MUT (piezoelectric composite micromachined ultrasound transducers), diced 10 MHz and 15 MHz 1-3 composite transducers were successfully demonstrated with broad bandwidth and high sensitivity. In this paper, the design, fabrication and characterization of composite transducers are reported. C-scan experiments for SiC ceramic ...

متن کامل

Theoretical and experimental study on temperature elevation behind ribs caused by weakly focused ultrasound.

Temperature distribution in tissues behind ribs produced by weakly focused ultrasound had been calculated using Pennes bioheat equation and the validity of the theoretical model was experimentally confirmed in vitro using porcine live. We found that the position of the maximum temperature in tissue is strongly influenced by the distance between the transducer and ribs, while the gap between rib...

متن کامل

The Improvement in Measuring Position and Orientation of Laparoscopic Tools Using the Cross Correlation Method

A new ultrasound wireless positioning system is developed that gives the surgeon the exact 3D location and orientation of the instruments in the patient. The measuring system employs ultrasound markers/ transmitters placed on the instruments, outside of the human body. Knowing the dimensions of the usually rigid instruments it is possible to calculate their position and orientation inside the p...

متن کامل

The Dynamic Performance of Flexural Ultrasonic Transducers

Flexural ultrasonic transducers are principally used as proximity sensors and for industrial metrology. Their operation relies on a piezoelectric ceramic to generate a flexing of a metallic membrane, which delivers the ultrasound signal. The performance of flexural ultrasonic transducers has been largely limited to excitation through a short voltage burst signal at a designated mechanical reson...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 7  شماره 

صفحات  -

تاریخ انتشار 2007