The shape of cells adhering to sulfonated copolymer surfaces.

نویسندگان

  • Hanna M Kowalczyńska
  • Małgorzata Nowak-Wyrzykowska
  • Marcin Inkielman
  • Liliana Stołowska
  • Ewa Marciniak
چکیده

We studied the shape of L1210 leukaemia cells adhering in a protein-free medium to sulfonated (styrene/methyl methacrylate) copolymer surfaces of two sulfonic group densities, and thus of differing wettability. The use of our image analysis method and the mathematical procedure [Kowalczynska, H.M. et al, Colloids Surfaces B: Biointerfaces, 30 (2003) 193-206.] allowed us to calculate the values of the so-called shape parameter, which quantitatively determines the three-dimensional cell shape. Here, we show that the values of the shape parameter of the adhering cells and the F-actin concentration, in the region near the cell-substratum interface, depend on the density of sulfonic groups present on the substratum surface.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Adhesion of L1210 cells to modified styrene copolymer surfaces in the presence of serum.

The static adhesion of living L1210 cells (in serum-containing medium) to the surface of (styrene/methylmethacrylate) copolymers differing in styrene content (from 5% to 50% of styrene units) was investigated. The examination of wettability of the copolymer surfaces showed that the contact angle of water on the hydrophobic surfaces is an increasing linear function of styrene content in the copo...

متن کامل

Sulfonation and Characterization of Poly(styrene-isobutylene-styrene) Triblock Copolymers at High Ion-Exchange Capacities

In this study, a triblock copolymer, poly(styrene-isobutylene-styrene), was sulfonated to eight different levels ranging from 0.36 to 2.04 mequiv./g (13 to 82 mol% of styrene; styrene is 19 mol% of the unsulfonated block copolymer). These sulfonated polymers were characterized with elemental analysis and infrared spectroscopy to confirm sulfonation and determine accurate sulfonation levels. Inf...

متن کامل

Adhesion of microorganisms to bovine submaxillary mucin coatings: effect of coating deposition conditions.

The adhesion of Staphylococcus epidermidis, Escherichia coli, and Candida albicans on mucin coatings was evaluated to explore the feasibility of using the coating to increase the infection resistance of biomaterials. Coatings of bovine submaxillary mucin (BSM) were deposited on a base layer consisting of a poly(acrylic acid-b-methyl methacrylate) (PAA-b-PMMA) diblock copolymer. This bi-layer sy...

متن کامل

Synthesis of Sulfonated Polystyrene/acrylate–ionic Liquid (Si-SPS/A–IL) Hybrid Membranes for Methanol Fuel Cells

In this paper, the silicon-containing sulfonated polystyrene/acrylate–ionic liquid (Si-SPS/A–IL)hybrid membranes was prepared to obtain the proton exchange membrane (PEM) materials withhigh methanol barrier and good selectivity. The Si-SPS/A–IL hybrid membranes characterized asthe function of IL to evaluate their potential as PEMs in direct methanol fuel cells (DMFCs).Fourdifferent Hybrid mater...

متن کامل

Fabrication and Characterization of a Conductive Proton Exchange Membrane Based on Sulfonated Polystyrenedivinylbenzene Resin-Polyethylene (SPSDR-PE): Application in Direct Methanol Fuel Cells

A novel proton exchange membrane has been prepared using sulfonated poly(styrene-divinylbenzene) resin(SPSDR)–polyethylene(PE). The membrane is characterized by FT-IR, SEM and TGA/DSC. Water uptake, oxidative resistance, ionic conductivity and methanol permeability are measured to evaluate its performance in a direct methanol fuel cell. The on-set degradation temp...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Cellular & molecular biology letters

دوره 10 1  شماره 

صفحات  -

تاریخ انتشار 2005