Preconceptual Design of an Injector for an Nlc Engineering Test Facility

نویسندگان

  • A. M. M. Todd
  • H. P. Bluem
  • C. L. Bohn
چکیده

The preconceptual design of an S-band photo-injector system for a Next Linear Collider (NLC) Engineering Test Facility (ETF) at Fermi National Accelerator Laboratory (FNAL) has been completed. A photocathode gun will deliver a range of bunch charges up to 4 nC at around 190 MeV. The projected performance is 2.5 π mm-mrad rms normalized transverse emittance at 1 nC and 6.7 π mm-mrad at 3.6 nC bunch charge, for 0.5 mm rms radius spherical bunches with an energy spread of less than 0.1%. We describe the proposed beamline and the performance achieved in end-to-end simulations.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Test Facilities for Future Linear Colliders

For many years now there has been active research around the world towards a future linear collider with an energy of about 1 TeV. This research has led to several test facilities around the world that seek to test key aspects of the various approaches. A comparison of the approaches to the design is given in these proceedings [1]. The purpose of this paper is to review the status of the test f...

متن کامل

Update to the NLC Injector System Design*

The Next Linear Collider (NLC) Injector System is designed to produce low emittance 8 GeV electron and positron beams at 120 hertz for injection into the NLC main linacs. Each beam consists of a 265 ns train of bunches (190 bunches spaced by 1.4 ns or 95 bunches spaced by 2.8 ns); each bunch has a population of up to 1.6x10 particles for 2.8 ns (or 0.8x10 particles for 1.4 ns). Horizontal and v...

متن کامل

Ergonomics and simulation-based approach in improving facility layout

The use of the simulation-based technique in facility layout has been a choice in the industry due to its convenience and efficient generation of results. Nevertheless, the solutions generated are not capable of addressing delays due to worker’s health and safety which significantly impact overall operational efficiency. It is, therefore, critical to incorporate ergonomics in facility design. I...

متن کامل

An Integrated Approach for Reliable Facility Location/Network Design Problem with Link Disruption

Proposing a robust designed facility location is one of the most effective ways to hedge against unexpected disruptions and failures in a transportation network system. This paper considers the combined facility location/network design problem with regard to transportation link disruptions and develops a mixed integer linear programming formulation to model it. With respect to the probability o...

متن کامل

Preliminary Design Concepts for the Control and Data Acquisition Systems of the Iter Neutral Beam Injector and Associated Test Facility

ITER is a joint international research and development project aiming to demonstrate the scientific and technical feasibility of fusion power. The ITER Neutral Beam Injector (negative H or D ion source, 1MV acceleration voltage, 40A ion current, 16.5MW beam power, 1 hour continuous operation) is a major and innovative component of ITER and will be supported by a dedicated Test Facility. The neu...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2001