Analysis of Yarn Bending Behaviour
نویسندگان
چکیده
This paper addresses the bending behaviour of individual multi-filament yarns for use in textile forming analyses. Yarn specimens deform nonlinearly under their own weight in a cantilever configuration. A relation between the applied moment and the resulting curvature is established. Numerical simulations are performed to establish the contribution of shear rigidity to the deflection.
منابع مشابه
Bending and Compression Behaviour of Polyester Air-jet-textured and Cotton-yarn Fabrics
Air-jet-textured polyester yarns were produced using two feed yarns differing in filament fineness and number of filaments. By varying the yarn overfeed, filament fineness and air pressure, four textured yarns were produced. Woven fabrics were prepared using these textured yarns as weft and cotton yarns in warp. To study the effect of air-jet-texturing parameters on the bending and compression ...
متن کاملRedistribution of Fibers in the Structure of Hollow Ring Spun Yarn
Core yarn was spun by introducing a PVA multifilament as the core through the yarn forming zone of a ring spinning frame and viscose fibers as the sheath containing tracer fibers. The water soluble PVA multifilament was extracted from the yarn structure. Then internal structure and properties of the hollow ring yarn was assessed and compared with those of typical ring yarns. Also, two plain fab...
متن کاملNumerical Investigation of Rail Bending Behaviour Focusing on the Effect of Track Modulus
Thorough understanding of steel rail response to wheel load is a key step towards design and evaluation of the railway track structure. In current practice, maximum vertical deflection and bending moment are calculated using the theory of infinite beam on continuous elastic foundation (Winkler model), in which the foundation stiffness is assumed as constant. However, variation of track modulus ...
متن کاملGeometrical Modelling of 3d Textile Composite Application to Warp Interlock Carbon Fabrics
In order to better predict the composite material behaviour, mechanical engineers need safe software tools to model the textile structure and to integrate into simulating software by the use of finite element approach. Then, it’s necessary to have a clear description of the textile structure at each scale. The microscopic scale involves the filaments position and distribution to define the exte...
متن کاملModeling friction for yarn/fabric simulation Application to bending hysteresis
This paper describes studies done at Gemtex Laboratory on the modeling and simulation of woven fabric. The main difficulty in this area is to take into account the hysteresis phenomena that occurs in fabric’s traction, shearing and bending behavior. Part I of this paper presents a friction based approach to obtain a time-free model for this nonlinear phenomena. Part II presents the application ...
متن کامل