High Performance Rogowski Current Transducers
نویسندگان
چکیده
A Rogowski current transducer is an invaluable tool for semiconductor and power electronic circuit development since it is non-intrusive and does not saturate at high currents. This paper reviews the operating principles, performance limitations and development of this measurement technology and outlines improvements to the integrator design that enables bandwidths of 10MHz to be achieved.
منابع مشابه
Rogowski coil current transducer compensation method for harmonic active power error
In the harmonic active power measurement, the highest uncertainties are generally introduced by the current and voltage transducers. In a previous paper, the authors showed that the current transformer (CT) can introduce significant errors in such measurement, especially if the phase shift between voltage and current is close to ±90 . In such condition the errors on harmonic power measurement a...
متن کاملDesign Modification of Rogowski Coil for Current Measurement in Low Frequency
The principle object of this paper is to offer a modified design of Rogowski coil based on its frequency response. The improvement of the integrator circuit for nullifying the phase difference between the waveforms of the measured-current and the corresponding terminal voltage is a further object of this investigation. This paper addresses an accurate, yet more efficient measuring and protect...
متن کاملDesign of Rogowski Coil with external integrator for measurement of lightning current up to 400kA
Lightning is one of the most serious disasters in the electrical power grid, especially in the ultra-high and extra-high voltage power systems. The measurement of the lightning current parameters is of great importance for the investigation of lightning protection. The literature shows given its significant advantages over equivalent current transducers, the Rogowski coil is an increasingly pop...
متن کاملFem Analysis of Rogowski Coils Coupled with Bar Conductors
− We study the behavior of Rogowski coils coupled with bar conductors under quasi-static conditions. Through a finite element (FEM) analysis, we estimate the current distribution across the bar and the flux linked by the transducer for various positions of the primary conductor and for various operating frequencies. Simulation and experimental results are reported in the text.
متن کاملLow-Cost Current Sensor for Power Capacitors Based on a PCB Rogowski-Coil
The paper presents a low-cost current sensor for power capacitors in power electronic converters, especially for DC link electrolytic capacitors of PWM converters. The sensor is based on a Rogowskicoil which is implemented very cost-effectively using a small standard printed circuit board (PCB) located directly at the capacitor terminals. Due to the measuring principle the output signal inheren...
متن کامل