Preparation of zinc oxide nanorods using pulsed laser ablation in water media at high temperature.

نویسندگان

  • Yoshie Ishikawa
  • Yoshiki Shimizu
  • Takeshi Sasaki
  • Naoto Koshizaki
چکیده

ZnO columnar single crystals were formed by pulsed laser ablation in deionized water and surfactant aqueous solutions of lauryl dimethylaminoacetic acid (LDA) and cetyltrimethylammonium bromide (CTAB) at 80 degrees C. ZnO particles produced by laser ablation were dissolved at a higher temperature than 60 degrees C, and then crystalline growth to columnar structure proceeded. While large ZnO columnar crystals were obtained in deionized water, the crystals prepared in surfactant solution were smaller than those in deionized water due to inhibition of crystalline growth by surfactant adsorption on ZnO surfaces. The size of ZnO nanorods depended on how surfactant molecules adsorb on ZnO surface.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Preparation and characterization of colloidal ZnO nanoparticles using nanosecond laser ablation in water

Pulsed laser ablation in liquid was employed to synthesize zinc oxide (ZnO) nanocolloidal suspension. Colloidal ZnO nanocrystals are synthesized by pulsed laser ablation of high purity zinc target in double distilled water with various laser fluences at RT. UV–visible absorption and transmission electron microscope are used for the characterization of colloidal ZnO nanoparticles (NPs). The opti...

متن کامل

A Systematic Study on the Structural and Optical Properties of Vertically Aligned Zinc Oxide Nanorods Grown by High Pressure Assisted Pulsed Laser Deposition Technique

In this study, we synthesize high quality vertically aligned ZnO (VAZO) nanorods on silicon, sapphire, and indium tin oxide (ITO) substrates by using pulsed laser deposition (PLD) technique at high growth pressure (0.3 Torr). Systematic changes in structural and optical properties of VAZO nanorods are studied by varying the substrate temperature (500-600 °C) and number of pulsed laser shots dur...

متن کامل

Study of laser ablation using nano-second laser pulses

 In this paper, the laser ablation process based on the irradiation of nanosecond pulsed lasers on a copper target surface in the presence of Helium gas is studied. The dynamical behaviors of the generated plasma in the helium gas and evaporated copper at the atmospheric pressure are examined using a laser pulse, laser wavelength of and intensity of 7×1010W/cm2. A one-dimensional thermal model ...

متن کامل

Growth of Zinc Oxide Nanopores by Pulsed Laser Ablation

ZnO thin films of porous structure with strong c-axis orientation were deposited on n-type silicon substrate by pulsed laser ablation of ZnO target in low O2 pressure (around 0.03 mbar) and at 600C substrate temperature. We attribute the formation of nanopores and the crater-like formation to the high kinetic energy of the ablated particles. Photoluminescence spectra show the near band edge emi...

متن کامل

ZnO nanorods prepared via ablation of Zn with millisecond laser in liquid media.

ZnO nanomaterials with controlled size, shape and surface chemistry are required for applications in diverse areas, such as optoelectronics, photocatalysis, biomedicine and so on. Here, we report on ZnO nanostructures with rod-like and spherical shapes prepared via laser ablation in liquid using a laser with millisecond-long pulses. By changing laser parameters (such as pulse width and peak pow...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of colloid and interface science

دوره 300 2  شماره 

صفحات  -

تاریخ انتشار 2006