Simulations of Passive Matrix Polymer Image Sensors
نویسنده
چکیده
Two-dimensional passive photodiode matrices are hardly useful for image sensing due to the crosstalk between pixels. This crosstalk makes it difficult to recover information from individual pixels. A switching unit attached to each sensing unit has been the common solution in image sensors (such as in CMOS sensors and in TFT-PiN a-Si photosensors). A novel organic photodiode with voltage-switchable photosensitivity was developed recently. Passive photodiode matrices made with such organic photodiodes can be used for image sensing applications. This circuit simulation study demonstrates an effective scheme to extract images from passive photodiode matrices, concluding that individual photodiode parameters determine the contrast and resolution of N by M image sensors.
منابع مشابه
Crosstalk and image uniformity in passive matrix polymer LED displays
Passive matrix displays based on polymer and organic light-emitting diodes suffer from crosstalk, when the emission of light from one pixel depends on the operation of another pixel. We use circuit simulation in order to explain the causes of crosstalk and to quantify the consequences. Thrs work analyzes how crosstalk arises from electrode resistance, pixel leakage current, and the location of ...
متن کاملEffects of Nanotube/Matrix Interface on Multi-Walled Carbon Nanotube Reinforced Polymer Mechanical Properties
In this paper, experimental and Finite Element Methods have been used to determine mechanical properties of nanocomposites. Standard tensile and compression samples with 0.0, 0.15, 0.25, 0.35, 0.45, and 0.55 weight fraction of Multi-Walled Carbon Nanotube (MWCNT) were prepared and tested. Nanotube weight fraction was varied to investigate the effects of nanotube weight fraction on nanocomposite...
متن کاملPassive wireless sensors using electrical transition of carbon nanotube junctions in polymer matrix
This paper presents the design and development of a passive wireless sensor for the detection of bio-hazard materials and vapors using chemiresistive thin films. Composite polymer thin film with functionalized carbon nanotubes (f-CNT) and polymethylmethacrylate (PMMA) is employed as a sensing material. It is investigated that resistance change is determined with the concentration of dichloromet...
متن کاملFeasibility of Polysulfone as Base Polymer in a Polymer Inclusion Membrane: Synthesis and Characterisation
Polysulfone was investigated as an alternative base-polymer for polymer inclusion membranes (PIM’s) that could withstand harsh environmental conditions and have good transport efficiency of metal ions. PIM’s were prepared using polysulfone as a base polymer and Aliquat 336 as a carrier in the absence of a plasticizer. Chromium (VI) was used as standard to study the extraction efficiency of the ...
متن کاملA numerical study on reinforced composites by spherical nano-particles
In the current paper, finite element method is employed for numerical simulations and the study of influential parameters on elastic modulus of polymer-matrix nano-composites. Effects of different key parameters including particle elastic modulus, interphase elastic modulus, matrix elastic modulus, interphase thickness and particle volume fraction on total elastic modulus of nano-composite mate...
متن کامل