The Influence of Liquids on Compressor Valves
نویسنده
چکیده
The presen~e of liquids in a ~ompressor valve environment is a major fa~tor in the life of a valve or sealing element. The nature of the fluid, the quantity in the system and the distribution of the fluid are of major ~onsequen~e. Through the use of modelling techniques these influen~es are analyzed, specifi~ally th~ affe~t of geo•etry on the sti~king effect. Several solutions to redu~e the eff~t of sti~king are investigated.
منابع مشابه
Numerical Analysis of the Dynamics of Reed Valves Taking into Account the Acoustic Coupling with the Fluid
The dynamics of reed valves of a reciprocating compressor is tightly coupled with the dynamics of fluid inside compressor ducts. A global model of a refrigerator compressor is developed taking into account the net flow through the ducts. Results show that reed valves vibrations influence the compressor cycle and can produce noise in the high frequency range.
متن کاملDevelopment of a compression system dynamic simulation code for testing and designing of anti-surge control system
In recent years, several research activities have been conducted to develop knowledge in analysis, design and optimization of compressor anti-surge control system. Since the anti-surge control testing on a full-scale compressor is limited to possible consequences of failure, and also the experimental facility can be expensive to set up control strategies and logic, design process often involves...
متن کاملStudy on the Fatigue Strength of a Suction Flapper Valve Used in a High Efficient Reciprocating Compressor
Suction valves with even thinner and narrower, used in a high efficient reciprocating compressor, are required in order to reduce suction resistances. However, low flow resistance suction valves run properly under the very severe operating condition of high periodic impact stress which can cause the compressor failure. In this study, the effects of the valve design parameters on the impact fati...
متن کاملA 3-D Transient CFD Model of a Reciprocating Piston Compressor with Dynamic Port Flip Valves
In this paper a full transient 3-D CFD model of a complete single piston compressor system along with dynamic inlet and outlet port flip valves is presented. The model includes the motion of the cam driven piston, and also predicts the motion of the dynamic flip valves. All activities related to model creation, simulation and postprocessing were performed within the simulation software Simerics...
متن کاملInfluence of Pipeline Operating Pressure on Value Setting of Automatic Control Valves at Different Pressure Drop Rates
When a natural gas pipeline ruptures, the adjacent upstream and downstream automatic control valves (ACV) should close quickly to prevent leakage or explosion. The differential pressure set point (DPS) at each valve location is the main criteria for value setting in ACV actions. If the DPS is not properly adjusted, the ACV may mistakenly close or it may not take any actions at a proper ti...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2014