A Planar Electroosmotic Micropump
نویسندگان
چکیده
Electroosmotic (EO) micropumps use field-induced ion drag to drive liquids and achieve high pressures in a compact design with no moving parts. An analytical model applicable to planar, etched-structure micropumps has been developed. This model consists of pressure and flow relations in addition to an analytical expression that can be used to estimate the thermodynamic efficiency of planar EO pumps. The analytical model was applied to guide the design of a pump consisting of an etched EO flow chamber for near-optimal hydraulic power performance. To achieve high efficiency, the working fluid used was deionized (DI) water with a conductivity of 3.0 10 4 S/m (pH = 5 7). The EO micropump was fabricated on a soda-lime glass substrate using standard microlithography and chemical wet etching techniques. The active pumping volume of the device consists of a wet-etched flow channel 1–mm long in the flow direction and 0.9 m by 38-mm in cross section. The pump performance agrees well with the theoretical model. The pump can produce a maximum pressure of 0.33 atm and a maximum flow rate of 15 L/min min at 1 kV. [791]
منابع مشابه
Improved Two-Side AC Electroosmotic Micropump
This paper reports on the fabrication and experimental characterisation of improved design AC eletroosmotic micropumps. Since the first study and analysis of AC electroosmosis by Ramos et al. [1], many devices have been fabricated and tested [2]. The basic planar electrode design was improved and increased pumping velocities were measured. Among the proposed improvements, 3D electrode design se...
متن کاملAn Electromagnetically-Actuated All-PDMS Valveless Micropump for Drug Delivery
This paper presents the fabrication process of a single-chamber planar valveless micropump driven by an external electromagnetic actuator. This micropump features a pair of micro diffuser and nozzle elements used to rectify the fluid flow, and an elastic magnetic membrane used to regulate the pressure in the enclosed fluid chamber. Polydimethylsiloxane (PDMS) is used as the main construction ma...
متن کاملAC electroosmotic pump with bubble-free palladium electrodes and rectifying polymer membrane valves.
We present the design, test and theoretical analysis of a novel micropump. The purpose is to make a pump with large flow rate (approximately 10 microL min-1) and high pressure capacity (approximately 1 bar) powered by a low voltage DeltaV<30 V. The pump is operated in AC mode with an electroosmotic actuator in connection with a full wave rectifying valve system. Individual valves are based on a...
متن کاملMultiple open-channel electroosmotic pumping system for microfluidic sample handling.
The development of a novel, fully integrated, miniaturized pumping system for generation of pressure-driven flow in microfluidic platforms is described. The micropump, based on electroosmotic pumping principles, has a multiple open-channel configuration consisting of hundreds of parallel, small-diameter microchannels. Specifically, pumps with microchannels of 1-6 microm in depth, 4-50 mm in len...
متن کامل