An Ultra-low Power Voltage Regulator System for Wireless Sensor Networks Powered by Energy Harvesting

نویسندگان

  • Chao Wang
  • Alireza Khaligh
چکیده

Title of Document: AN ULTRA-LOW POWER VOLTAGE REGULATOR SYSTEM FOR WIRELESS SENSOR NETWORKS POWERED BY ENERGY HARVESTING Chao Wang, Doctor of Philosophy, 2014 Directed By: Professor Martin Peckerar Department of Electrical and Computer Engineering A DC-DC converter is an important power management module as it converts one DC voltage level to another suitable for powering a desired electronic system. It also stabilizes the output voltage when fluctuations appear in the power supplies. For those wireless sensor networks (WSNs) powered by energy harvesting, the DC-DC converter is usually a linear regulator and it resides at the last stage of the whole energy harvesting system just before the empowering sensor node. Due to the low power densities of energy sources, one may have to limit the quiescent current of the linear regulator in the sub-μA regime. This severe restriction on quiescent current could greatly compromise other performance aspects, especially the transient response. This dissertation reports a voltage regulator system topology which utilizes the sensor node state information to achieve ultra-low power consumption. The regulator system is composed of two regulators with different current driving abilities and quiescent current consumptions. The key idea is to switch between the two regulators depending on the sensor state. Since the “right” regulator is used at the “right” time, the average quiescent current of the regulator system is minimized, and the trade-off between low quiescent current and fast transient response has been eliminated. In order to minimize the average quiescent current of the system, nano-ampere reference current design is studied, and the proposed reference current circuit is shown (theoretically and experimentally) to reduce the supply voltage dependence by 5X. The regulator system has been fabricated and tested using an ON Semiconductor 0.5 μm process. It has been verified through experiments that the proposed system reduces the quiescent current by 3X over the state-of-the-art in the literature; and, more importantly, it achieves low quiescent current, low dropout voltage, and fast transient response with small output voltage variation all at the same time. The thesis further presents data on the application of energy harvesting system deriving energies from various RF signals to power a commercial off-shelf wireless sensor node. AN ULTRA-LOW POWER VOLTAGE REGULATOR SYSTEM FOR WIRELESS SENSOR NETWORKS POWERED BY ENERGY HARVESTING

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

HYREP: A Hybrid Low-Power Protocol for Wireless Sensor Networks

In this paper, a new hybrid routing protocol is presented for low power Wireless Sensor Networks (WSNs). The new system uses an integrated piezoelectric energy harvester to increase the network lifetime. Power dissipation is one of the most important factors affecting lifetime of a WSN. An innovative cluster head selection technique using Cuckoo optimization algorithm has been used in the desig...

متن کامل

RF Energy Harvesting System And Rectennas

Recent advances in ultra-low power wireless communications and energy-harvesting technologies have made self-sustainable devices feasible. Typically, the major concern for these devices is battery life and replacement. Applying energy harvesting techniques to these devices can significantly extend battery life and sometimes even eliminate the need for a battery. This technique is widely applica...

متن کامل

Real-Time Performance of a Self-Powered Environmental IoT Sensor Network System

Wireless sensor networks (WSNs) play an increasingly important role in monitoring applications in many areas. With the emergence of the Internet-of-Things (IoT), many more lowpower sensors will need to be deployed in various environments to collect and monitor data about environmental factors in real time. Providing power supply to these sensor nodes becomes a critical challenge for realization...

متن کامل

Energy harvesting by magnetostrictive material (MsM) for powering wireless sensors in SHM

A new class of vibrational energy harvester based on Magnetostrictive material (MsM) Metglas 2605SC is deigned, developed, and tested in building practical energy harvesting wireless sensor networks. Compared to piezoelectric material, Metglas 2605SC offers advantages including ultra-high energy conversion efficiency, high power density, longer life cycles without depolarization issue, and flex...

متن کامل

Micro-scale variation-tolerant exponential tracking energy harvesting system for wireless sensor networks

Self-powered stand-alone electronic systems, targeting low power applications, are the future of power management. In wireless sensor networks (WSNs) and implantable devices, battery replacement is expensive and power management of these systems is essential. Energy harvesting is considered one of the main power management methods that scavenge energy from the ambient resources that are availab...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014