Optimal design of transmitter and receiver filters with mixed performance objectives
نویسندگان
چکیده
Nonsmooth optimization is applied to the design of transmitter and receiver lters for data transmission. This optimization method allows tradeoos between several performance measures{ISI, transmitter lter average power output, and receiver lter power gain. An FCC mask constraint on the transmitter lter is imposed. An example illustrates the design method.
منابع مشابه
Design of redundant FIR precoders for arbitrary channel lengths based on an MMSE criterion
In this paper, the joint design of transmitter and receiver for multichannel data transmission over dispersive channels is considered. In particular, the practically important case where the transmitter consists of FIR filters and the channel impulse response has arbitrary length is addressed. The design criterion is the minimization of the mean squared error at the receiver output under the co...
متن کاملDesign of Filterbank Transceivers for Dispersive Channels with Arbitrary-Length Impulse Response
This paper addresses the joint design of transmitter and receiver for multichannel data transmission over dispersive channels. The transmitter is assumed to consist of FIR filters and the channel impulse response is allowed to have arbitrary length. The design criterion is the maximization of the information rate between transmitter input and receiver output under the constraint of a fixed tran...
متن کاملMMSE design of redundant FIR precoders for arbitrary channel lengths
In this paper, the joint design of transmitter and receiver for multichannel data transmission over dispersive channels is considered. The design criterion is the minimization of the mean squared error (MSE) at the receiver output under the constraint of a fixed transmit power. The focus is on the practically important case where the transmitter employs finite impulse response (FIR) filters, an...
متن کاملA 910MHz Injection Locked BFSK Transceiver for Wireless Body Sensor Network Using Colpitts Oscillator
A 910MHz high efficiency RF transceiver for Wireless Body Area Network in medical application is presented in this paper. High energy efficiency transmitter and receiver architectures are proposed. In wireless body sensor network, the transmitter must have higher efficiency compared with the receiver because a large amount of data is sent from sensor node to receiver of the base station and sma...
متن کاملLossless and Lossy Broadcast System Source Codes: Theoretical Limits, Optimal Design, and Empirical Performance
Broadcast systems are a class of networks where one system node (transmitter) simultaneously sends both common and independent information to multiple nodes (receivers) in the system. Compressing the messages transmitted in such systems using traditional (single-transmitter, single-receiver) techniques requires use of a collection of independent source codes, one for each message sent through t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 1996