Vapor-liquid equilibria from the triple point up to the critical point for the new generation of TIP4P-like models: TIP4P/Ew, TIP4P/2005, and TIP4P/ice.

نویسندگان

  • C Vega
  • J L F Abascal
  • I Nezbeda
چکیده

The vapor-liquid equilibria of three recently proposed water models have been computed using Gibbs-Duhem simulations. These models are TIP4P/Ew, TIP4P/2005, and TIP4P/ice and can be considered as modified versions of the TIP4P model. By design TIP4P reproduces the vaporization enthalpy of water at room temperature, whereas TIP4P/Ew and TIP4P/2005 match the temperature of maximum density and TIP4P/ice the melting temperature of water. Recently, the melting point for each of these models has been computed, making it possible for the first time to compute the complete vapor-liquid equilibria curve from the triple point to the critical point. From the coexistence results at high temperature, it is possible to estimate the critical properties of these models. None of them is capable of reproducing accurately the critical pressure or the vapor pressures and densities. Additionally, in the cases of TIP4P and TIP4P/ice the critical temperatures are too low and too high, respectively, compared to the experimental value. However, models accounting for the density maximum of water, such as TIP4P/Ew and TIP4P/2005 provide a better estimate of the critical temperature. In particular, TIP4P/2005 provides a critical temperature just 7 K below the experimental result as well as an extraordinarily good description of the liquid densities from the triple point to the critical point. All TIP4P-like models present a ratio of the triple point temperature to the critical point temperature of about 0.39, compared with the experimental value of 0.42. As is the case for any effective potential neglecting many body forces, TIP4P/2005 fails in describing simultaneously the vapor and the liquid phases of water. However, it can be considered as one of the best effective potentials of water for describing condensed phases, both liquid and solid. In fact, it provides a completely coherent view of the phase diagram of water including fluid-solid, solid-solid, and vapor-liquid equilibria.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Surface tension of the most popular models of water by using the test-area simulation method.

We consider the calculation of the surface tension from simulations of several models of water, such as the traditional TIP3P, SPC, SPC/E, and TIP4P models, and the new generation of TIP4P-like models including the TIP4P/Ew, TIP4P/Ice, and TIP4P/2005. We employ a thermodynamic route proposed by Gloor et al. [J. Chem. Phys. 123, 134703 (2005)] to determine the surface tension that involves the e...

متن کامل

The melting temperature of the most common models of water.

The melting temperature of ice I(h) for several commonly used models of water (SPC, SPC/E,TIP3P,TIP4P, TIP4P/Ew, and TIP5P) is obtained from computer simulations at p = 1 bar. Since the melting temperature of ice I(h) for the TIP4P model is now known [E. Sanz, C. Vega, J. L. F. Abascal, and L. G. MacDowell, Phys. Rev. Lett. 92, 255701 (2004)], it is possible to use the Gibbs-Duhem methodology [...

متن کامل

Computer simulation of two new solid phases of water: Ice XIII and ice XIV.

NpT Monte Carlo simulations have been performed for two recently discovered solid phases of water which have been denoted as ice XIII and ice XIV C. G. Salzmann et al. [Science311, 1758 (2006)]. Several potential models of water were considered, namely, the traditional SPC/E, TIP4P, and TIP5P and the more recent TIP5P-E, TIP4P-Ew, TIP4P/Ice, and TIP4P/2005 models. Significant differences in den...

متن کامل

The melting point of ice Ih for common water models calculated from direct coexistence of the solid-liquid interface.

In this work we present an implementation for the calculation of the melting point of ice I(h) from direct coexistence of the solid-liquid interface. We use molecular dynamics simulations of boxes containing liquid water and ice in contact. The implementation is based on the analysis of the evolution of the total energy along NpT simulations at different temperatures. We report the calculation ...

متن کامل

What ice can teach us about water interactions: a critical comparison of the performance of different water models.

The performance of several popular water models (TIP3P, TIP4P, TIP5P and TIP4P/2005) is analyzed. For that purpose the predictions for ten different properties of water are investigated, namely: 1. vapour-liquid equilibria (VLE) and critical temperature; 2. surface tension; 3. densities of the different solid structures of water (ices); 4. phase diagram; 5. melting-point properties; 6. maximum ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • The Journal of chemical physics

دوره 125 3  شماره 

صفحات  -

تاریخ انتشار 2006