Effects of hemostatic agents on shear bond strength of orthodontic brackets.
نویسندگان
چکیده
OBJECTIVES The aim of this study was to determine the effects of blood contamination and hemostatic agents on shear bond strength (SBS) of brackets and bond failure. MATERIALS AND METHODS The study material consisted of 57 freshly extracted human premolar and randomly divided into four groups: Group I, control group (n0 = 14); Group II, contamination with blood (n = 13); Group III, contamination with epinephrine ( n = 14); and Group IV, contamination with Ankaferd blood stopper (ABS) ( n = 16). After the bracket bonding procedure, all bonded teeth thermal cycled in deionized water at 5 ± 2°C to 55 ± 2°C for 500 cycles. SBS was applied using a universal test machine. RESULTS According to Kruskal-Wallis test significant differences were found among the groups P < 0.05. Furthermore, significant differences were recorded between groups with Mann-Whitney U statistical test with Bonferroni correction (P = 0.0083). CONCLUSIONS Examples contaminated with blood showed a statistically significant lower in vitro SBS than those contaminated with epinephrine, ABS, and control groups. CLINICAL SIGNIFICANCE In impacted tooth surgical operations, blood contamination poses a substantial risk of bond failure in bonding attachments applications to the impacted teeth. Epinephrine and ABS may be used on surgical exposed impacted teeth operation for the prevention of blood contamination.
منابع مشابه
Are Bonding Agents being Effective on the Shear Bond Strength of Orthodontic Brackets Bonded to the Composite?
Introduction: One of the clinical problems in orthodontics is the bonding of brackets tocomposite restorations. The aim of this study was to evaluate the shear bondstrength of brackets bonded to composite restorations using Excite. Methods:Forty brackets were bonded to composite surfaces, which were embedded inacrylic resin. One of the following four protocols was employed for surfacepreparatio...
متن کاملIn vitro Effects of a Neutral Fluoride Agent on Shear Bond Strength and Microleakage of Orthodontic Brackets
Introduction: This study aimed to evaluate the effect of pretreatment with a neutral fluoride agent on shear bond strength (SBS) and microleakage of orthodontic brackets, and to investigate any significant relationship between SBS and microleakage. Methods: Forty intact premolars were selected and randomly divided into 2 groups. Group 1 served as the control, while group 2 underwent treatment w...
متن کاملEffect of Saliva Contamination and sequencing time of curing the Transbond™ Plus Self Etching Primer on the Shear Bond Strength of Orthodontic Brackets
Abstract Background and aim: Over the years, improvments have been done to simplify clinical bonding procedure. One of these material is Transbond™ Plus Self Etching. The aim of this study was to evaluate the effect of saliva contamination and reusing Transbond™ Plus Self Etching Primer (SEP) on shear bond strength of orthodontic brackets. Materials and Methods: Fifty premolars divided into fiv...
متن کاملEffect of Pretreatment with Fluoride, Chlorhexidine, and Mixed Fluoride-Chlorhexidine Gels on Shear Bond Strength of Orthodontic Brackets: An Ex-Vivo Study
Background and Aim: Orthodontic patients are at an increased risk of caries due to difficulty in plaque control. Antimicrobial agents, such as fluoride and chlorhexidine, can be useful in preventing tooth demineralization. The present study aimed to determine the effect of fluoride and chlorhexidine gels and their mixture on the shear bond strength (SBS) of orthodontic brackets. Materials and ...
متن کاملمقایسه استحکام باند برشی براکتهای فلزی باند شده با کامپوزیت بیس سایلوران و کامپوزیت بیس متاکریلات
Background and Aims: Orthodontic bracket failure during treatment is a common problem. With the introduction of low shrinkage composites the question is that whether: this sufficient has coefficient bond strength for bonding bracket during orthodontic treatment. The aim of this study was to compare the shear bond strength (SBS) of silorane-based and metacrylate-based composites to metal brack...
متن کاملShear Bond Strength of Metallic and Ceramic Brackets Bonded with Two-step and Three-step Light Cure Adhesives
Background and purpose: The bonding process is highly important in orthodontic treatment for its fast speed. The purpose of this study was to compare the shear bond strength of ceramic and metallic brackets between three stage (transbondTM XT) and two stage (GC ortho connectTM) light cure composites. Materials and methods: In this experimental study, 80 maxillary and mandibular first and sec...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Nigerian journal of clinical practice
دوره 18 2 شماره
صفحات -
تاریخ انتشار 2015