Partial volume correction for approximating crack opening displacements in CFRP material obtained from micro-focus X-ray CT scans
نویسندگان
چکیده
displacements in CFRP material obtained from micro-focus X-ray CT scans D.J. Bull, I. Sinclair, S.M. Spearing 1 Materials Research Group, Faculty of Engineering and the Environment, University of Southampton, Southampton, United Kingdom * Corresponding author ([email protected])
منابع مشابه
The Effect of CFRP Length on the Failure Mode of Strengthened Concrete Beams
This paper reports the effects of carbon fiber-reinforced polymer (CFRP) length on the failure process, pattern and crack propagation for a strengthened concrete beam with an initial notch. The experiments measuring load-bearing capacity for concrete beams with various CFRP lengths have been performed, wherein the crack opening displacements (COD) at the initial notch are also measured. The app...
متن کاملEffect of scatter coincidences, partial volume, positron range and non-colinearity on the quantification of FDOPA Patlak analysis
Introduction: The key characteristics of positron emission tomography (PET) are its quantitative capability and its sensitivity, which allow the in vivo imaging of biochemical interactions with small amounts of tracer concentrations. Therefore, accurate quantification is important. However, it can be sensitive to several physical factors. The aim of this investigation is the assessment of the e...
متن کاملThree-dimensional assessment of low velocity impact damage in particle toughened composite laminates using micro-focus X-ray computed tomography and synchrotron radiation laminography
Results are presented studying the contribution of particle toughening to impact damage resistance in carbon fibre reinforced polymer materials. Micro-focus Xray computed tomography and synchrotron radiation computed laminography were used to provide a novel, multiscale approach for assessing impact damage. Thin (1mm thick) composite plates containing either untoughened or particle-toughened re...
متن کاملInvestigation of self-healing in cementitious materials with sulfoaluminate cement microcapsules using X-ray computed tomography
This paper presents work toward the studying of a new family of self-healing cementitious material. This innovative system features the design of microcapsules with calcium sulfoaluminate cement (CSA) as healing agent. The aim of this study is to comprehensively monitor the whole crack-healing process of microcapsules based self-healing system by means of X-ray computed tomography (X-ray CT). I...
متن کاملComparison of different segmentation methods for porosity evaluation in CFRP-reference samples with real porosity samples
The main objective of this work is quantitative evaluation of porosity in carbon fiber reinforced polymers (CFRP) with the help of X-ray computed tomography (XCT). For this purpose two types of sample were compared. Industrial porosity sample was obtained from an aeronautical industry. Artificially induced porosity samples were created by drilling holes with diameter 0.2 mm and 0.3 mm in non-po...
متن کامل