Tool Wear Detection Based on Duffing-Holmes Oscillator
نویسندگان
چکیده
The cutting sound in the audible range includes plenty of tool wear information. The sound is sampled by the acoustic emission AE sensor as a short-time sequence, then worn wear can be detected by the Duffing-Holmes oscillator. A novel engineering method is proposed for determining the chaotic threshold of the Duffing-Holmes oscillator. First, a rough threshold value is calculated by local Lyapunov exponents with a step size 0.1. Second, the exact threshold value is calculated by the Duffing-Holmes system in terms of the law of the golden section. The advantage of the method is low computation cost. The feasibility for tool condition detection is demonstrated by the 27 kinds of cutting conditions with sharp tool and worn tool in turning experiments. The 54 group data sampled as noisy are embedded into the Duffing-Holmes oscillator, respectively. Finally, one chaotic threshold is determined conveniently which can distinguish between worn tool or sharp tool.
منابع مشابه
Frequency–driven chaos in the electrical circuit of Duffing-Holmes oscillator and its control
Accurate detection of weak periodic signals within noise and possibility of secure messaging have made Duffing oscillator (DO) highly important in the field of communication. Investigation on the properties of DO is thus ardently sought for. An elegant approach to accomplish the same is to fabricate electronic circuit simulating DO non-linear equation and to study the effect of input signal amp...
متن کاملStability Analysis of a Strongly Displacement Time-Delayed Duffing Oscillator Using Multiple Scales Homotopy Perturbation Method
In the present study, some perturbation methods are applied to Duffing equations having a displacement time-delayed variable to study the stability of such systems. Two approaches are considered to analyze Duffing oscillator having a strong delayed variable. The homotopy perturbation method is applied through the frequency analysis and nonlinear frequency is formulated as a function of all the ...
متن کاملHybrid Control to Approach Chaos Synchronization of Uncertain DUFFING Oscillator Systems with External Disturbance
This paper proposes a hybrid control scheme for the synchronization of two chaotic Duffing oscillator system, subject to uncertainties and external disturbances. The novelty of this scheme is that the Linear Quadratic Regulation (LQR) control, Sliding Mode (SM) control and Gaussian Radial basis Function Neural Network (GRBFNN) control are combined to chaos synchronization with respect to extern...
متن کاملStudy on Chaos-Based Weak Signal Detection Method with Duffing Oscillator
Aiming at the feature extraction of weak periodic signal in early fault of machinery, a novel weak periodic signal detection with Duffing oscillator based on empirical mode decomposition (EMD) was presented. The chaotic character of Duffing oscillator was analyzed, and the Melnikov method of determining chaotic threshold of Duffing oscillators was discussed. The principle of weak signal detecti...
متن کاملWeak Signal Detection with Duffing Oscillator Based on Virtual Instrument Technology
To obtain new ways of detecting weak signals, we analyzed the motion of a Duffing oscillator in different input states by solving the Duffing equation and then elaborating on the basic principles of weak signal detection based on Duffing oscillator phase-change characteristics. The experiment that shows how to achieve weak signal detection with a Duffing oscillator based on virtual instrument t...
متن کامل