Electrodeposition of Nanostructured Magnesium Coatings
نویسندگان
چکیده
In this work, we report on the electroplating of ultrafine and uniform magnesium (Mg) films on copper (Cu) and carbon nanotube (CNT) paper substrates. By controlling the process parameters and utilizing the pulsed deposition method, the average grain size of Mg was reduced to nanodimensions. Surface pretreatment of the substrates by depositing a seed layer was found to be an efficient strategy for reducing the energy barrier for nucleation, thus improving nucleation density and the uniformity of deposited coatings. This work provides important guid‐ ance for the fabrication of smooth nanostructured Mg films on different substrates for a wide variety of applications.
منابع مشابه
Characterisation and Corrosion Performance of MultilayerNano Nickel Coatings on AZ31 Magnesium Alloy
Ni-P and Ni layers multilayer coatings were applied to AZ31 magnesium alloy utilizing electroless and electrodeposition procedures. The aim of the project was to decrease cracks and increase corrosion resistance of the coatings. In order to compare the coatings, the effect of single layer electroless Ni-P coatings with different thicknesses was also investigated. The microstructure and phase co...
متن کاملEffect of pulsed current densities on co-electrodeposition of Graphene Oxide/ Calcium-Phosphate coatings and their biocompatibility
In this study, calcium-phosphate (Ca-P) and graphene oxide (GO)/ calcium-phosphate (Ca-P) coatings were electrodeposited with different pulsed current densities on TiO2 nanotubes. Results showed that the co-electrodeposition rate in the presence of GO, especially at low current densities of 2 and 5 mA/cm2, significantly decreased. This might be due to the large size of GO sheets as compared to ...
متن کاملAn Investigation on the Electrodeposition Mechanism of Ni-TiO2 Nanocomposite Coatings
In this research, a sol-modified composite electrodeposition technique that combines the sol-gel method with the conventional electrodeposition process was utilized to deposit Ni-TiO2 nanocomposite coatings. Cyclic voltammetry and chronoamperometry techniques were applied to study the influence of the TiO2 sol concentration on the deposits’ electrochemical behavior. The results clearly showed t...
متن کاملThe formation of nanostructured surfaces by electrochemical techniques: a range of emerging surface finishes. Part 2: examples of nanostructured surfaces by plating and anodising with their applications
In part 1 of this review, emerging practice to realise nanostructured metallic coatings by electrodeposition, anodising and electrophoresis has been considered. Conventional, aqueous electrolytes may be utilised in some cases if workpiece preparation and process conditions are well controlled. Such coatings can provide wear and corrosion resistance or a catalytic or high active area compared to...
متن کاملElectrodeposited lead dioxide coatings.
Lead dioxide coatings on inert substrates such as titanium and carbon now offer new opportunities for a material known for 150 years. It is now recognised that electrodeposition allows the preparation of stable coatings with different phase structures and a wide range of surface morphologies. In addition, substantial modification to the physical properties and catalytic activities of the coatin...
متن کامل