Computational Simulation and Analysis of Energy-saving Glazing Units in Residential Buildings
نویسنده
چکیده
Building materials have played a more and more important role in saving building energy since the central government of China set higher standards and requirements for new-constructed and retrofit buildings after 2005. Glazing units, especially energy-saving units including LOW-E coated glazing units and PVB laminated glass, are utilized nation-wide. This paper employs energy simulation to analyze the energysaving effects of different glazing units in residential buildings in the city of Guangzhou, as an example of hothumid climate in China. It appeals that the PVB laminated glass can refuse 44 % solar radiation to enter rooms and reduce 40 % of the shading coefficient comparing to clear glass. Meanwhile, in the aspects of operation and design of the HVAC system, 28 % of cooling load, 21 % of installed capacity and 8.6 % of full-load operation time can be saved. Copyright © 2013 IFSA.
منابع مشابه
Analysis of the Performance of Vacuum Glazing in Office Buildings in Korea: Simulation and Experimental Studies
Window performance in buildings is very important for energy saving. Many efforts have been made towards saving energy in buildings, and research has focused attention on enhancing the thermal performance of windows. Vacuum glazing has attracted much interest as a means of enhancing the thermal performance of windows by strengthening insulation performance. However, the performance of vacuum gl...
متن کاملInvestigating the role of high-rise building shell elements in reducing energy consumption (case example: Isfahan Cascade doctors' residential towers)
Significant energy is used to provide and maintain environmental conditions for thermal comfort in high-rise residential buildings, which largely depends on the components of the shell design. Therefore, to achieve high amounts of energy savings in buildings, high-impact design measures must first be defined and then optimized. This study seeks to answer the question of how the components of th...
متن کاملA Comparison of the Energy Saving and Carbon Reduction Performance between Reinforced Concrete and Cross-Laminated Timber Structures in Residential Buildings in the Severe Cold Region of China
This paper aims to investigate the energy saving and carbon reduction performance of cross-laminated timber residential buildings in the severe cold region of China through a computational simulation approach. The authors selected Harbin as the simulation environment, designed reference residential buildings with different storeys which were constructed using reinforced concrete (RC) and cross-...
متن کاملEnergy Simulation and Management of the Main Building Component Materials Using Comparative Analysis in a Mild Climate Zone
The objective of this study is to evaluate the energy efficiency of residential buildings by using natural energy and optimizing the choice of materials for heat and cold saving with the Ecotect simulation software. According to analysis and simulation was found that the optimum material of main building components in a mild climate zone of Rasht city is the Brick Conc block Plaster for wall wi...
متن کاملOptimizing Window Size and its Sunshade in Four Main Directions of Residential Buildings in Mild Climate by Integrating Thermal and Lighting Analysis
As part of sustainable architecture principles and practices, designers need to define building's architectural requirements based on climatic conditions, environmental preservation and reduction in energy consumption. The natural energy sources such as solar radiation affect thermal and lighting performances of buildings depending on its facade characteristics. Traditionally, buildings thermal...
متن کامل