Solvent Extraction and Separation of Copper and Zinc from a Pickling Solution
نویسندگان
چکیده
Solvent extraction studies of copper and zinc have been carried out using Versatic 10 acid and Cyanex 272 separately from a model brass pickle liquor. Various parameters for the extraction and separation of copper and zinc such as effect of pH, extractant concentration, phase ratio etc. have been optimized. It was observed that copper was almost completely extracted into the organic phase comprising of 30% Versatic 10 acid at the equilibrium pH of 5.0 using the phase ratio of 1:1 whereas, zinc extraction was noticed at above pH 5.0. On the other hand the pH0.5 values were 3.5 and 4.6 for zinc and copper respectively with 20% Cyanex 272. The difference in pH0.5 value of 1.10 indicated the possible separation of Zn and Cu. By McCabe Thiele diagram number of stages required for the counter current extraction of copper and zinc has been determined for both the solvents. The stripping study showed that 1 mol/L H2SO4 was sufficient to strip metal ions in a single contact from each of the extractant.
منابع مشابه
Selective and Efficient Solvent Extraction of Copper(II) Ions from Chloride Solutions by Oxime Extractants
Oxime extractants 3-tert-butyl-2-hydroxy-5-methyl benzaldehyde oxime (HL1) and 3-tert-butyl-2-hydroxy-5-methoxy benzaldehyde oxime (HL2) were synthesized and characterized by conventional spectroscopic methods. Suitable lipophilic nature of the prepared extractants allowed examining the ability of these molecules for extr...
متن کاملSelective Recovery of Zinc over Iron from Spent Pickling Wastes by Different Membrane-based Solvent Extraction Process Configurations
This paper reports the selective separation of zinc over iron from spent pickling wastes or effluents using two different membrane-based solvent extraction process configurations, Nondispersive solvent extraction (NDSX) and emulsion pertraction technology (EPT). The process aims to obtain a highly concentrated zinc solution with a negligible content of iron to allow for Zn electrowinning. The e...
متن کاملExtraction of Zn, Mn and Co from Zn-Mn-Co-Cd-Ni containing solution using D2EHPA, CYANEX® 272 and CYANEX® 302
Effects of pH, D2EHPA, Cyanex® 302 and Cyanex® 272 on extractions of zinc, manganese and cobalt from a Zn-Mn-Co-Cd-Ni containing solution was comprehensively investigated at the room temperature. The addition of Cyanex® 302 indicated a left-shifting-effect on the extraction curve of zinc, a right-shifting-effect on the extraction curve of manganese and no effect on the extraction of cobalt. The...
متن کاملSolvent extraction, spectrophotometric determination of copper (II) from environmental samples using o-methylphenyl thiourea as a novel reagent
A simple and rapid method has been developed for solvent extraction and spectrophotometric determination of copper (II) using o-methylphenyl thiourea (OMPT) as a sensitive reagent. The basis of proposed method is formation of copper (II)-OMPT complex. Copper (II) was extracted with 0.020 mol L-1 OMPT in chloroform from aqueous solution in 0.075 mol L-1 potassium iodate. The absorbance of comple...
متن کاملSolvent extraction and stripping of zinc from synthetic chloride solution in presence of manganese and cadmium as impurities
In this research work, solvent extraction and stripping of zinc ions from a Zn-Mn-Cd-bearing solution was investigated using D2EHPA as the extractant in a chloride medium. The efficiency of the extraction and stripping stages was evaluated separately, and different parameters such as the pH, extractant concentration, reaction temperature, and contact time were studied. Based on the results obta...
متن کامل