Computer-optimised current waveforms for switched-reluctance motors
نویسنده
چکیده
The paper discusses the design of optimised current waveforms, to give the lowest RMS current per phase for a given mean torque. The waveforms are constrained to be within the converter VA rating. Current waveforms and the associated voltage waveform, over a wide speed range, are given for a representative motor.
منابع مشابه
Computer-optimised smooth-torque current waveforms for switched-reluctance motors
The paper discusses the design of current waveforms for switched-reluctance motors, which give rise to a constant (ripple-free) torque. The waveforms are optimised by computer search techniques, to give the lowest RMS current per phase consistent with producing smooth torque. Furthermore. the waveforms are constrained to be within the converter’s VA rating. Current waveforms and the associated ...
متن کاملan Efficient Drive Circuit for Switched Reluctance Motor
The purpose of this paper is to present an efficient converter circuit used to drive switched reluctance motors. It uses the C-dump topology in which the trapped energy in the phase windings is returned to the supply capacitor to be used in the following strokes. In addition to the C-dump topology, it uses two extra feedbacks. One comes from a governor mounted on the shaft of motor which contro...
متن کاملTorque Ripple Reduction in Switched Reluctance Motors by Rotor Poles Shape and Excitation Pulse Width Modification
In this paper, at first, a 24/16 three-phase switched reluctance motor is designed, then the rotor poles shape tips corrected for reduction ripple of single-phase torque waveform. By doing this, the single-phase torque waveform has a flat surface and consequently, the single-phase torque ripple is reduced. Also, due to the commutation between the machine phases, the torque drops during this tim...
متن کاملDirect Torque Control of 5-Phase 10/8 Switched Reluctance Motors
A switched Reluctance motor (SRM) has several desirable features, including simple construction, high reliability and low cost. However, it suffers from large torque ripple, highly non-uniform torque output and magnetization characteristics and large noise. Several studies have succeeded in torque ripple reduction for SRM using Direct Torque Control (DTC) technique. DTC method has many adva...
متن کاملA Design Package for Single Tooth per Stator Pole Switched Reluctance Motors
A design package is developed for a single-tooth per stator pole switched reluctance motor, 6/4. The rather simple assumed flux path method is used to estimate the unaligned permeance including the leakage permeances and the effects of shallow slot and tooth taper. The possibility of making rotor tooth width greater than stator tooth width is examined using the developed package. The result app...
متن کامل