electro - spinnability of alginate solutions containing gold precursor HAuCl

نویسندگان

  • George C. Anyfantis
  • Hadi Hajiali
  • Elisa Mele
  • Sergio Marras
  • Riccardo Carzino
  • Lara Marini
  • Athanassia Athanassiou
چکیده

Alginate nanofibers with an average diameter of 75 nm have been prepared by the electrospinning process. In addition, the spinnability of the solutions in the presence of the gold precursor HAuCl4 was investigated. At low concentrations of HAuCl4 well-formed nanofibers were produced, whereas as its concentration increases the nanofibrous mats present an increased number of bead-like defects. Herein, the in situ preparation of gold nanoparticles (Au NPs) is discussed since sodium alginate (SA) acts as the reducing agent and a mechanism is proposed in order to explain the beadeffect as well as the surface morphology of the alginate fibers decorated with Au NPs.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Porous gold nanobelts templated by metal-surfactant complex nanobelts.

Unique, porous gold nanobelts consisting of self-organized nanoparticles were synthesized in a high yield by morphology-preserved transformation from metal-surfactant complex precursor nanobelts formed by a bolaform surfactant dodecane-1,12-bis(trimethylammonium bromide) (N-C(12)-NBr(2)) and HAuCl(4). It was revealed that the precursor nanobelts of the stoichiometric N-C(12)-N(AuCl(4))(2) compl...

متن کامل

Investigating the Spinnability in the Dry-Jet Wet Spinning of PAN Precursor Fiber

The spinnability of a spinning solution using DMSO as the solvent was investigated for dry-jet wet spinning of PAN precursor fiber. Among many variables responsible for spinnability, the coagulating conditions, the air gap length, the nonsolvent content in spinning solution, and the spinning temperature have been viewed as the key factors, and they were investigated in this study. It was found ...

متن کامل

Influence of Solution Properties and Process Parameters on the Formation and Morphology of YSZ and NiO Ceramic Nanofibers by Electrospinning

The fabrication process of ceramic yttria-stabilized zirconia (YSZ) and nickel oxide nanofibers by electrospinning is reported. The preparation of hollow YSZ nanofibers and aligned nanofiber arrays is also demonstrated. The influence of the process parameters of the electrospinning process, the physicochemical properties of the spinning solutions, and the thermal treatment procedure on spinnabi...

متن کامل

A seedless approach to continuous flow synthesis of gold nanorods.

A direct seedless method for the continuous synthesis of gold nanorods has been developed using a sequential rotating tube-narrow channel processing microfluidic configuration, with the stock feed solutions (HAuCl(4)/CTAB/acetylacetone and AgNO(3)/CTAB/carbonate buffer) being stable for weeks.

متن کامل

One-step preparation of hybrid materials of polyacrylamide networks and gold nanoparticles.

Hybrid materials of polyacrylamide networks and gold nanoparticles were prepared by directly heating an aqueous solution containing HAuCl(4), acrylamide, N,N'-methylenebis-acrylamide, and sodium sulfite (Na(2)SO(3)). Acrylamide, N,N'-methylenebis-acrylamide, and Na(2)SO(3) were used as monomers, crosslinking agent, and initiator, respectively. In the process of polyacrylamide network synthesis,...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2017