Dependence of the catalytic decomposition of PH 3 on wire material
نویسنده
چکیده
The decomposition processes of PH3 on heated W, Mo, Ta, and Ir surfaces were studied using mass spectrometric and laser spectroscopic techniques. For all wire materials, the decomposition efficiency saturated to around 50% at high wire temperatures. The P-atom density also saturated showing only minor dependence on the wire materials. At lower temperatures, however, the production rate of P atoms on Ta was higher than that on W, while that for Mo was lower, suggesting that the decomposition processes are not thermal but catalytic. The production rate on Ir was similar to that on W. Possible decomposition mechanisms are discussed. Keyword Catalytic decomposition, PH3, Laser spectroscopy, Mass spectrometry
منابع مشابه
Catalytic Decomposition of H2O2 on MnFe2O4 Nanocomposites Synthesized by Various Methods in the Presence of Silicate and Zeolite Supports
In this research iron manganese oxide nanocomposites were prepared by co-precipitation, sol-gel and mechanochemical methods by using iron (III) nitrate, iron (II) sulfate and manganese (II) nitrate as starting materials. These nanocomposites were prepared in the presence of various catalyst beds. The polyvinyl pyrrolidon (PVP) was used as a capping agent to control the agglomeration of the nano...
متن کاملCatalytic Decomposition of Hydrogen Peroxide in the Presence of Synthesized Iron-Manganese oxide Nanocomposites via Different Methods
The special application of iron-manganese oxide nanocatalysts has been investigated in decomposition of hydrogen peroxide. In this research, iron-manganese oxide nanocomposites were synthesized by co-precipitation, sol-gel and mechanochemical methods using iron (III) nitrate, iron (II) sulfate and manganese (II) nitrate as starting materials. These nanocomposites were prepared on the variou...
متن کاملCatalytic Decomposition of H2O2 on MnFe2O4 Nanocomposites Synthesized by Various Methods in the Presence of Silicate and Zeolite Supports
In this research iron manganese oxide nanocomposites were prepared by co-precipitation, sol-gel and mechanochemical methods by using iron (III) nitrate, iron (II) sulfate and manganese (II) nitrate as starting materials. These nanocomposites were prepared in the presence of various catalyst beds. The polyvinyl pyrrolidon (PVP) was used as a capping agent to control the agglomeration of the nano...
متن کاملStudy on Catalysis of Cu-Fe Metal Composite Oxides to Thermal Decomposition Behavior of Bluestone
Nano-CuFe2O4 catalysts with different Cu/Fe molar ratios (CunFemO(n+1.5m)) were prepared by hydrothermal method. The thermal decomposition performance of CunFemO(n+1.5m) on CuSO4 were determined with TG-DSC method to evaluate its catalytic activity and the roasted product was characterized by ...
متن کامل