Design of CDBA-based active polyphase filter for low-IF receiver applications
نویسنده
چکیده
A novel first-order active-RC polyphase filter section, using current differencing buffered amplifiers (CDBAs), is presented. The section uses 6 resistors, 2 capacitors, and 2 CDBAs. The transfer function of the proposed section has a single pole and optionally a single zero. Increasing the number of cascading sections, any higher order polyphase filter can be realized. This paper also introduces the leakage caused by element deviation and the effects of the amplifier in nonideal cases. Furthermore, nonideal performances of the proposed filter section are tested with PSpice simulations.
منابع مشابه
The Design of Active Polyphase Filter
The fast growth of wireless applications in recent years has driven intense efforts to design highly integrated, high-performance, low-cost RFICs. Both low-IF [33]-[37] and double-quadrature [38]-[40] architectures have been adopted as promising receiver topologies to realize these design goals because they combine the advantages of heterodyne and direct-conversion architectures. In the low-IF ...
متن کاملDesign of Gate-Driven Quasi Floating Bulk OTA-Based Gm–C Filter for PLL Applications
The advancement in the integrated circuit design has developed the demand for low voltage portable analog devices in the market. This demand has increased the requirement of the low-power RF transceiver. A low-power phase lock loop (PLL) is always desirable to fulfill the need for a low power RF transceiver. This paper deals with the designing of the low power transconductance- capacitance (Gm-...
متن کاملA Single-Chip 2.4GHz Low-Power CMOS Receiver and Transmitter for WPAN Applications
A single chip 2.4GHz low power CMOS receiver and transmitter for WPAN applications are implemented and measured. The receiver uses a low-IF architecture with a polyphase filter and transistor linearization technique to improve linearity per power, and the transmitter adopts a ROM based direct-conversion architecture for low power consumption and high integrated density. Experimental results sho...
متن کاملTheory and design of spectrum-efficient bandwidth-on-demand multiplexer-demultiplexer pairs based on wavelet packet tree and polyphase filter banks
A set of desirable characteristics of a multicarrier spectrumefficient bandwidth-on-demand multiplexer-demultiplexer pair for use in mobile satellite and personal communication systems is identified and described. New characteristics are the use of single VSB channels, design of multiplexer channels based on wavelet packet trees which have specified stopband attenuation, overlap of the multiple...
متن کاملDesign and Simulation of a Clamped-Clamped Micromechanical Beam AM Frequency Mixer-Filter
In the last decade Micromechanical components for communication applications has been fabricated via IC-compatible MEMS technologies. In fact, its most important impact is not at the component level, but rather at the system level, by offering alternative transceiver architectures that reduce power consumption and enhance performance. In this paper a mixer-filter for AM frequency receiver with ...
متن کامل