22 Solid Lubricants and Self - Lubricating Films
نویسنده
چکیده
22.
منابع مشابه
Application of a Thermodynamic Concept for the Analysis of Structural Degradation of Soap Thickened Lubricating Greases
Lubricating greases are special lubricants with a wide range of application. The tribologically stressed grease is used as tribological system and finally modeled as an open thermodynamic system. This study investigated the phenomenon of self-optimization and applied to the process of shearing a grease. The conditions for self-optimization and the consequences of created dissipative structures ...
متن کاملAbrasion properties of self-suspended hairy titanium dioxide nanomaterials
Considering the excellent solubility of pyrrolidone ring organic compounds, the synthesized N(trimethoxysilyl) propyl-N-methyl-2-pyrrolidone chlorides was tethered onto titanium dioxide (TiO2) nanoparticles to improve dispersion of TiO2, and then polyethylene oxide (PEO) oligomer through ion exchange embraced the tethered TiO2 to obtain a novel self-suspended hairy TiO2 nanomaterials without an...
متن کاملComplex frictional analysis of self-lubricant W-S-C/Cr coating.
Transition metal dichalcogenides belong to one of the most developed classes of materials for solid lubrication. However, one of the main drawbacks of most of the self-lubricating coatings is their low load-bearing capacity, particularly in terrestrial atmospheres. In our previous work, alloying thin films based on tungsten disulfide with non-metallic interstitial elements, such as carbon or ni...
متن کاملRubber Friction in Aqueous Solutions Containing Ions
Lubricants ordinarily operate by keeping two sliding surfaces separated. The efficiency of a lubricant may be expressed by equations of hydrodynamics where the mechanical properties of the films of lubricants are adequately defined by the properties of bulk lubricant. In the case of water lubrication of black rubber at slow speeds and low pressures the lubricating ability of water is shown to b...
متن کاملVapor lubricant transport in MEMS devices
Vapor phase lubrication is considered one of the most likely means of lubricating MEMS devices with replenishable solid films. Since gas phase diffusion is the primary means of vapor lubricant transport into the long, narrow channels of MEMS devices, it is necessary to determine that this is sufficient to replenish lubricant films worn at high rates. The diffusion of vapor phase lubricant into ...
متن کامل