Design Parameter Analysis of a Roll-to-Roll Printing Machine
نویسندگان
چکیده
The stability of multi-input and multi-output web-tension systems is an important factor that is required for the roll-to-roll printing machines. This paper analyzes stability for design parameters of a web-tension system of a high-speed gravure printing machine. Analyzed parameters include moment of inertia of the passive dancer, viscous friction coefficient of the dancer system, distances from hinge to dancer roller and cylinder, and proportional gains of the tension control system. The validity of the analysis is demonstrated by simulation study.
منابع مشابه
Two-dimensional Register Modeling and Control in Multi-layer Roll-to-roll e-Printing Systems
For the adaption of roll-to-roll printing method to the printed electronics, it is mandatory to increase the resolution of register control. A two-dimensional register was derived considering both the lateral motion and strain of a moving web, and the transverse position of a printing roll. Also, a correlation between machine directional register and cross directional register was analyzed and ...
متن کاملTowards Realizing High-Throughput, Roll-to-Roll Manufacturing of Flexible Electronic Systems
High-rate roll-to-roll (R2R) tracker systems are utilized for large volume flexible electronic device manufacturing, and the current alignment mechanism between layers is mainly achieved by relying on passive techniques. In this paper, we present a machine vision based alignment strategy that is used to achieve precise registration for stacking multilayers. Based on this strategy, we demonstrat...
متن کاملAnalysis on the ink transfer mechanism in R2R application
Ink transfer process from the printing roll to the web was investigated using a Computational Fluid Dynamics (CFD) technique for the roll-to-roll (R2R) printing application. A parametric study was conducted to identify the effects of fluid parameters such as viscosity, surface tension and contact angle. To make the present analysis more relevant to the real printing system, a three-dimensional ...
متن کاملDetermination of Buckling Limit of Strain in Cold Roll Forming through Finite Element Analysis
In this study, "Buckling Limit of Strain" (B.L.S.) is introduced as one of the most important limiting factors in cold roll forming process. B.L.S. is calculated by the finite element procedure. Then for two particular processes with existing analysis and experimental results, B.L.S. has been determined and evaluated. LUSAS 12.3 is used for finite element analysis. The results show that when bu...
متن کاملDetermination of Buckling Limit of Strain in Cold Roll Forming through Finite Element Analysis
In this study, Buckling Limit of Strain (B.L.S.) is introduced as one of the most important limiting factors in cold roll forming process. B.L.S. is calculated by the finite element procedure. Then for two particular processes with existing analysis and experimental results, B.L.S. has been determined and evaluated. LUSAS 12.3 is used for finite element analysis. The results show that when buck...
متن کامل