Improvement Of Abnormal Wear Between The Vane-slot And Vane In Rotary Compressor
نویسندگان
چکیده
The reason for the abnormal wear between the vane-slot and the vane in the rotary compressor is analyzed in this paper. Firstly, the influence of lubrication at the clearance, the machining equipment accuracy and oil circulation (oil flow rate) is analyzed. Then the material characteristics including the hardness of the vane and vane-slot, the surface treatment of the vane and the deformation of the vane-slot after welding are discussed. After we find the main correlating factors, we will examine the results from the experiments. Eventually, problem of the abnormal wear is solved by inducing an innovative oil circulation.
منابع مشابه
Vane Dynamics Analysis of a Tilted Vane Rotary Compressor
An analytical model of vane dynamics in a tilted vane rotary compressor is presented. With the geometric relationship of the vane in a tilted slot, and the roller, the kinetic equations were derived for evaluating the reciprocating inertial force of the vane, and the chamber volume equations were obtained for calculating pressure history inside the compression chamber. The empirical friction co...
متن کاملMixed Lubrication Analysis of Vane Sliding Surface in Rotary Compressor Mechanisms
In this study, in order to investigate the lubrication characteristics of the sliding surface of the vane in a rotary compressor, numerical analysis for mixed lubrication has been developed. In this analysis, the modified Reynolds equation and the elastic contact equation, considering the surface roughness, are solved as a coupled problem. Using this analysis, the lubrication characteristics of...
متن کاملWear-Less Technology for Rotary Compressor Using CO2 Refrigerant
We have developed a new CO2 heat pump water heater compressor with a single rotary mechanism in practical use for the first time in the world. CO2 refrigerant doesn't destroy the ozone layer, and the global warming potential (GWP) is less than 1/1000 in comparison to hydro-fluorocarbon refrigerants. However the operating pressure of CO2 refrigerant is approximately three times as high as that o...
متن کاملSelection of Friction Materials Used in Compact, High Performance Inverter Controlled Rotary Compressors
T. IIZUKA and K. IKEDA Tochigi Works Hitachi, Ltd. Shimotsuga-gun, Tochigi-ken, Japan, 329-44 Since applications of rotary compressors driven by inverter motors have become more widespread, l~bricating problems with the sliding parts have been appearing. The sliding parts require sufficient antiseizure and wear-resistant properties under the boundary lubricating conditions. The authors have dev...
متن کاملCompressor with Turning-Paired Vane and Piston
With the aim of developing a method for reducing energy consumption of room air conditioners, we address a higher-efficiency design of the rotary compressor currently most used worldwide. We focused on a new rotary compressor equipped with a mechanism to restrict the rolling motion of the piston, and performed a dynamics analysis. The new rotary compressor has a small pillar at the tip of the v...
متن کامل