Timing System of Spring-8 Booster Synchrotron
نویسندگان
چکیده
The timing system of SPring-8 booster synchrotron generates various timing signals concerning beam injection, acceleration from 1 GeV to 8 GeV and ejection. We have improved the timing system of the synchrotron giving it better stability and flexibility. This improvement results the other merits of advanced operations, for example, storing electron beam in the synchrotron, changing the injection cycle from 1 Hz to the slower frequency to increase the RF knock-out (RF-KO) operation period and ejecting the low energy beam during ramping up.
منابع مشابه
Integration of the Booster Synchrotron Control System to the Spring-8 Control System
The integration of the booster synchrotron control system to the SPring-8 control system finished successfully in January 1999. This integration allows us to operate the synchrotron, the beam transport line and the storage ring in a seamless fashion.
متن کاملUpgrade of Linac Control System with New Vme Controllers at Spring-8
We integrated an injector linac control system to the SPring-8 standard system in September 2000. As a result of this integration, the SPring-8 accelerator complex was controlled by one unified system. Because the linac was continuously running as the electron beam injector not only for the SPring-8 storage ring but also for NewSUBARU, we had to minimize the hardware modification to reduce the ...
متن کاملRECENT PROGRESS OF THE SPring-8 FACILITY
Since October 1997, the SPring-8 facility has been operated well and provided high quality photon beams for users. Over this period, various kinds of improvements have been carried out to achieve brilliant and stable photon beams and to make the most of 8-GeV potentiality. At the same time R&D has continued for future radiation sources. In these activities, the largest achievement has been the ...
متن کاملSimulations of the Multiturn Injection into Nuclotron Booster
In order to increase the intensities of the ion beams in the JINR-Dubna superconducting Synchrotron NUCLOTRON, to raise their energies and to inprove their quality a booster synchrotron is under design. This booster synchrotron needs some kind of multiturn injection to store particles. The multiturn injection with betatron stacking is simulated in this paper. The simulations reveal the optimum ...
متن کاملBeam Halo Monitor Using Diamond Detectors for Xfel/spring-8
We have been developing an electron beam halo monitor as an interlock device for protection of undulator permanent magnets against radiation damage. When permanent magnets are irradiated with a halo part of 8GeV electron beam, magnetic fields undulators are degraded permanently and laser oscillation is weakened. Therefore, the interlock device is required during machine operation. Diamond detec...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2002