Carbon Nanotube-Based Composites Synthesized Using Porous Aluminum Oxide
نویسندگان
چکیده
Devices on the basis of carbon nanotube (CNT) were not used extensively up to date [6]. That is connected with a problem of receiving the reliable, corresponding to the sizes and properties of CNT, electrode systems [7]. As a rule, usually represented CNT-devices contain other elements of the scheme, including electrodes, of the micron size. In devices on the base of CNT-array, electrodes can have the sizes, usual for microelements.
منابع مشابه
Growth of well-aligned carbon nanotube arrays on silicon substrates using porous alumina film as a nanotemplate
Aligned, open-tipped carbon nanotube arrays of high density and uniformity were synthesized via a flame method on silicon substrates using a nanoporous template of anodized aluminum oxide from which the nanotubes were grown. The diameter and length of the nanotubes are controlled by the geometry of the aluminum oxide template. These results show the feasibility of integration between carbon nan...
متن کاملVertical single- and double-walled carbon nanotubes grown from modified porous anodic alumina templates
Vertical single-walled and double-walled carbon nanotube (SWNT and DWNT) arrays have been grown using a catalyst embedded within the pore walls of a porous anodic alumina (PAA) template. The initial film structure consisted of a SiOx adhesion layer, a Ti layer, a bottom Al layer, a Fe layer, and a top Al layer deposited on a Si wafer. The Al and Fe layers were subsequently anodized to create a ...
متن کاملHard template synthesis of metal nanowires
Metal nanowires (NWs) have attracted much attention because of their high electron conductivity, optical transmittance, and tunable magnetic properties. Metal NWs have been synthesized using soft templates such as surface stabilizing molecules and polymers, and hard templates such as anodic aluminum oxide, mesoporous oxide, carbon nanotubes. NWs prepared from hard templates are composites of me...
متن کاملMolecular Simulations on Interfacial Sliding of Carbon Nanotube Reinforced Alumina Composites
متن کامل
Formation of porous carbon materials with in situ generated NaF nanotemplate.
Porous carbon materials with pore sizes from 3 to 200 nm were synthesized by reacting hexafluorobenzene with Na liquid at 623 K. NaF crystals, a byproduct formed in the reaction, acted as nanotemplate to assist the pore formation. By employing hexafluorobenzene to react with Na incorporated within the channels (diameter 200 nm) of anodized aluminum oxide (AAO) membranes at 323-623 K, the carbon...
متن کامل