Nanostructuring titania by embossing with polymer molds made from anodic alumina templates.
نویسندگان
چکیده
We demonstrate a method for embossing titania sol--gel precursor with poly(methyl methacrylate) (PMMA) molds to make thin films of titania that have dense arrays of 35--65 nm diameter pores, whose features are 1 order of magnitude smaller than those previously demonstrated for sol--gel molding. We show that the high modulus of PMMA is necessary to preserve small features with high aspect ratios on the mold for nanopatterning. The molds are prepared by thermally infiltrating PMMA into anodic alumina templates, whose pore dimensions and depths are adjustable by varying anodization conditions. The difficulties associated with mold release from a master are avoided by wet etching the template. These titania films, and others made with other semiconductors, could be useful for photovoltaic, photocatalytic, and sensing applications where nanostructuring of surfaces with controlled dimensions are essential.
منابع مشابه
Fabrication of Acrylonitrile-Butadiene-Styrene Nanostructures with Anodic Alumina Oxide Templates, Characterization and Biofilm Development Test for Staphylococcus epidermidis
Medical devices can be contaminated by microbial biofilm which causes nosocomial infections. One of the strategies for the prevention of such microbial adhesion is to modify the biomaterials by creating micro or nanofeatures on their surface. This study aimed (1) to nanostructure acrylonitrile-butadiene-styrene (ABS), a polymer composing connectors in perfusion devices, using Anodic Alumina Oxi...
متن کاملElectrochemical coating of dental implants with anodic porous titania for enhanced osteointegration
Clinical long-term osteointegration of titanium-based biomedical devices is the main goal for both dental and orthopedical implants. Both the surface morphology and the possible functionalization of the implant surface are important points. In the last decade, following the success of nanostructured anodic porous alumina, anodic porous titania has also attracted the interest of academic researc...
متن کاملRf glow discharge optical emission spectrometry for the analysis of arrays of Ni nanowires in nanoporous alumina and titania membranes
During the last decade, a great variety of nanostructures (nanotubes, nanofibers or nanowires) based on metals, carbons, polymers or semiconductors, have been synthesized following different synthesis procedures by using nanoporous anodic alumina membranes (AAM) as templates [1]. The principal reason for using templates of nanoporous AAM as precursor patterns lies on the possibility to obtain, ...
متن کاملEnhancement of the thermo-mechanical properties of PDMS molds for the hot embossing of PMMA microfluidic devices
We present a cost-efficient and rapid prototyping technique for polymethylmethacrylate (PMMA) microfluidic devices using a polydimethylsiloxane (PDMS)-based hot embossing process. Compared to conventional hot embossing methods, this technique uses PDMS molds with enhanced thermo-mechanical properties. To improve the replication performance, increases in both PDMS stiffness and hardness were ach...
متن کاملStudy of Double-Side Ultrasonic Embossing for Fabrication of Microstructures on Thermoplastic Polymer Substrates
Double-side replication of polymer substrates is beneficial to the design and the fabrication of 3-demensional devices. The ultrasonic embossing method is a promising, high efficiency and low cost replication method for thermoplastic substrates. It is convenient to apply silicon molds in ultrasonic embossing, because microstructures can be easily fabricated on silicon wafers with etching techni...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Nano letters
دوره 5 8 شماره
صفحات -
تاریخ انتشار 2005