Foams in contact with solid boundaries: equilibrium conditions and conformal invariance.

نویسندگان

  • M Mancini
  • C Oguey
چکیده

A liquid foam in contact with a solid surface forms a two-dimensional foam on the surface. We derive the equilibrium equations for this 2D foam when the solid surface is curved and smooth, generalising the standard case of flat Hele-Shaw cells. The equilibrium conditions at the vertices in 2D, at the edges in 3D, are invariant by conformal transformations. Regarding the films, conformal invariance only holds with restrictions, which we explicit for 3D and flat 2D foams. Considering foams confined in thin interstices between two non-parallel plates, normal incidence and Laplace's law lead to an approximate equation relating the plate profile to the conformal map. Solutions are given for the logarithm and power laws in the case of constant pressure. The paper concludes on a comparison with available experimental data.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Wastewater Treatment by Using Polyurethane Foams Modified with Bis-[2-ethylhexyl] Phosphoric Acid: Kinetics, Equilibrium and Desorption Studies

Background: Water pollution is an important environmental problem, undoubtedly, the presence of toxic heavy metals forms the main source of water contamination. Sorption characteristics of polyurethane foams modified with bis (2-ethylhexyl)phosphoric acid (DEHPA) for the removal of zinc, lead and cadmium ions from contaminated solutions were investigated. Methods: Operating variables, such as ...

متن کامل

Simulation of Foaming and Deformation for Composite Aluminum Foams

In this study, at the first stage, the rupture criterion of bubbles wall in Aluminum metal foam liquid was investigated by using Lattice Boltzmann. The two phases modeling were accomplished by using a modified Shan-Chen model. This model was run for several bubbles in A356+3wt.%SiC melt system. Then, bubbles morphologies (virtual metallographic) for A356+3wt.%SiC foams were simulated. Results s...

متن کامل

Simulation of Ideal External and Internal Flows with Arbitrary Boundaries Using Schwarz Christoffel Transformation

The flow field, velocity and pressure coefficient distribution of some 2-D ideal flows are presented. Conformal mapping is used to simulate two-dimensional ideal flow for a variety of complex internal and external configurations, based on the numerical integration of Schwarz-Christoffel transformation. The advantages of this method are simplicity and high accuracy. The method presented in this ...

متن کامل

Possible Tests of Conformal Turbulence through Boundaries

We investigate various boundary conditions in two dimensional turbulence systematically in the context of conformal field theory. Keeping the conformal invariance, we can either change the shape of boundaries through finite conformal transformations, or insert boundary operators so as to handle more general cases. Effects of such operations will be reflected in physically measurable quantities ...

متن کامل

Thermal Contact Resistance at a Metal Foam-solid Surface Interface

Accurate information on heat transfer and temperature distribution in metal foams is necessary for design and modeling of thermal-hydraulic systems incorporating metal foams. The analysis of this process requires determination of the effective thermal conductivity as well as the thermal contact resistance (TCR) associated with the interface between the metal foams and adjacent surfaces/layers. ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • The European physical journal. E, Soft matter

دوره 17 2  شماره 

صفحات  -

تاریخ انتشار 2005