Fabrication and photoelectrochemical property of tungsten(vi) oxide films with a flake-wall structure.
نویسندگان
چکیده
Efficient visible light-induced photoelectrochemical oxidation of water was achieved using a tungsten(iv) oxide (WO(3)) film composed of perpendicularly oriented plate-like crystallites, a flake-wall film, prepared on a transparent conductive substrate by controlling anisotropic crystal growth of tungsten oxide hydrate (WO(3).H(2)O) followed by calcination.
منابع مشابه
Designing and Fabrication of Electrochromic Windows Using Tungsten Oxide Films Prepared Through Sol-gel Coating on a Glass
In this study, a sol-gel peroxotungstic acid sol was employed to deposit tungsten oxide (WO3) films by the spin-coating technique. In view of smart window applications, electrochromic windows were then designed and fabricated using a thin tungsten oxide film. For this purpose, Glass/ FTO/ WO3/ electrolyte/ FTO/Glass could be of use due to its special structure that consists of an electrochromic...
متن کاملElectrosprayed heterojunction WO3/BiVO4 films with nanotextured pillar structure for enhanced photoelectrochemical water splitting
Articles you may be interested in Carbon quantum dots coated BiVO4 inverse opals for enhanced photoelectrochemical hydrogen generation Appl. Electrochemical deposition of iron sulfide thin films and heterojunction diodes with zinc oxide Photoelectrochemical water splitting at titanium dioxide nanotubes coated with tungsten trioxide Appl.
متن کاملPhoto-Oxidation of Water Using Nanocrystalline Tungsten Oxide under Visible Light
The photoelectrolysis of water to yield hydrogen and oxygen using visible light has enormous potential for solar energy harvesting if suitable photoelectrode materials can be developed. Few of the materials with a band gap suitable for visible light activation have the necessary band-edge potentials or photochemical stability to be suitable candidates. Tungsten oxide (Ebg 2.8 eV) is a good cand...
متن کاملSession III ( Solid / liquid interfaces ; Metals ; Semiconductors ; Oxides and insulators )
Thin films of Zinc Oxide/Eosin Y were deposited on tungsten wires via electrochemical deposition from aqueous solutions by using the dye Eosin Y as a structure-directing agent (SDA). After deposition the SDA was removed by an aqueous alkaline solution, leaving behind a porous zinc oxide film. As a sensitizer, the dye D149 was adsorbed to the surface of the porous zinc oxide. The films were stud...
متن کاملComparison of doped combination zirconium-tungsten, zirconium- molybdenum and molybdenum-tungsten on single-wall vanadium oxide nanotube in hydrogen gas adsorption
In this study, doped vanadium oxide nanotubes were evaluated using different software to study the absorption of hydrogen gas. Vanadium oxide nanotubes are one of the options for absorption and storage hydrogen gas. In this research study for the first time, the Monte Carlo simulation was used to investigate the hydrogen gas absorption behavior in molybdenum-tungsten, molybdenum-zirconium and z...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Chemical communications
دوره 46 16 شماره
صفحات -
تاریخ انتشار 2010