Photocatalytic Segmented Nanowires and Single-step Iron Oxide Nanotube Synthesis: Templated Electrodeposition as all-round Tool
نویسندگان
چکیده
Templated electrodeposition was used to synthesize silver-zinc oxide nanowires and iron oxide (Fe2O3) nanotubes in polycarbonate track etched (PCTE) membranes. Metal/oxide segmented nanowires were made to produce hydrogen gas from a water/methanol mixture under ultraviolet irradiation. It was observed that gas production increased during irradiation. Iron oxide nanotubes were synthesized via a gel synthesis route, avoiding clogging of the membrane pores during growth. The nanotubes formed without thermal after-treatment. Transmission electron microscopy (TEM) analysis and selected area electron diffraction (SAED) revealed a completely amorphous iron oxide structure. By demonstrating the synthesis of photocatalytically active segmented nanowire and nanotubes without post-treatment steps, templated electrodeposition can be a versatile and low cost tool for nanowires with designed functionality or fast nanotube synthesis.
منابع مشابه
Preparation and Use of Photocatalytically Active Segmented Ag|ZnO and Coaxial TiO2-Ag Nanowires Made by Templated Electrodeposition
Photocatalytically active nanostructures require a large specific surface area with the presence of many catalytically active sites for the oxidation and reduction half reactions, and fast electron (hole) diffusion and charge separation. Nanowires present suitable architectures to meet these requirements. Axially segmented Ag|ZnO and radially segmented (coaxial) TiO2-Ag nanowires with a diamete...
متن کاملGrowth and Characterization of Iron Nanowires Into Anodized Aluminum Oxide Templates Using Electrodeposition Technique
The Fe nanowires were prepared by Ac electrodeposition method. The two steps anodized aluminum oxides (alumina) were used as templates for electrodeposition of magnetic nanowires. Sulfuric acid was used to anodize aluminum. The pours diameter and growth rate of alumina were investigated. The FeSO4 electrolyte was used for growth of nanowires. The prepared magnetic nanowires were characterized b...
متن کاملSynthesis of hybrid nanowire arrays and their application as high power supercapacitor electrodes.
Arrays of multi-segmented hybrid nanostructures of carbon nanotube and gold nanowires have been synthesized using a combination of chemical vapour deposition and electrodeposition methods and we further demonstrate that ultra-high power electrochemical double layer capacitors can be engineered using these hybrid nanowires, resulting in very high power densities.
متن کاملInvestigations of Magnetic Properties Through Electrodeposition Current and Controlled Cu Content in Pulse Electrodeposited CoFeCu Nanowires
CoFeCu nanowires were deposited by pulsed electrodeposition technique into the porous alumina templates by a two-step mild anodization technique, using the single-bath method. The electrodeposition was performed in a constant electrolyte while Cu constant was controlled by electrodeposition current. The electrodeposition current was 3.5, 4.25, 5 and 6 mA. The effect of electrodeposition current...
متن کاملDNA-directed synthesis of zinc oxide nanowires on carbon nanotube tips.
This paper describes a class of three component hybrid nanowires templated by DNA directed self-assembly. Through the modification of carbon nanotube (CNT) termini with synthetic DNA oligonucleotides, gold nanoparticles are delivered, via DNA hybridization, to CNT tips that then serve as growth sites for zinc oxide (ZnO) nanowires. The structures we have generated using DNA templating represent...
متن کامل