p-Doped three-dimensional graphene nano-networks superior to platinum as a counter electrode for dye-sensitized solar cells.
نویسندگان
چکیده
We report CVD-grown p-doped three-dimensional graphene nano-networks (3D-GNs) that provide superior performance to Pt as a counter electrode material in dye sensitized solar cells (DSSCs). The 3D-GN based DSSC exhibits a maximum photoconversion efficiency of 8.46%, which is 6.01% greater than that exhibited by Pt based DSSCs.
منابع مشابه
Recent development of carbon nanotubes materials as counter electrode for dye-sensitized solar cells
Dye-sensitized solar cells present promising low-cost alternatives to the conventional Silicon (Si)-based solar cells. The counter electrode generally consists of Pt deposited onto FTO plate. Since Pt is rare and expensive metal, nanostructured carbonaceous materials have been widely investigated as a promising alternative to replace it. Carbon nanotubes have shown significant properties such...
متن کاملFunctionalized graphene as a catalytic counter electrode in dye-sensitized solar cells.
When applied on the counter electrode of a dye-sensitized solar cell, functionalized graphene sheets with oxygen-containing sites perform comparably to platinum (conversion efficiencies of 5.0 and 5.5%, respectively, at 100 mW cm(-2) AM1.5G simulated light). To interpret the catalytic activity of functionalized graphene sheets toward the reduction of triiodide, we propose a new electrochemical ...
متن کاملBoron-doped graphene as a high-efficiency counter electrode for dye-sensitized solar cells.
Boron-doped graphene, synthesized by annealing a mixture of graphite oxide and B2O3, has shown a high conversion efficiency of 6.73% as a counter electrode (CE) for dye-sensitized solar cells, which is better than the Pt CE.
متن کاملComparison of Transparent Nickel Doped Cobalt Sulfide and Platinum Counter Electrodes Used in Quasi-Solid State Dye Sensitized Solar Cells
Transparent nickel doped cobalt sulfide was fabricated on a SnO2:F electrode and tested as an efficient electrocatalyst and as an alternative to the expensive platinum counter electrode. In order to investigate how this electrode could affect the electrical characteristics of a dye-sensitized solar cell, we manufactured cells with the same TiO2 photoanode sensitized with dye (N719) and employin...
متن کاملCharacteristics of PANi/rGO Nanocomposite as Protective Coating and Catalyst in Dye-sensitized Solar Cell Counter Electrode Deposited on AISI 1086 Steel Substrate
One of the possibilities to mass-produce dye-sensitized solar cell (DSSC) device is if it could be embedded to the area atop metal roof. However, the use of metal substrate is constrained by the corrosion caused by the electrolyte solution used in the DSSC device such as iodide/tri-iodide (I-/I3-). In this study, we propose the utilization of polyaniline/reduced graphene o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Chemical communications
دوره 50 19 شماره
صفحات -
تاریخ انتشار 2014