Role of electron capture in ion-induced electronic sputtering of insulators
نویسندگان
چکیده
Measurements of the sputtering yield of solid O2 by 25–240-keV H + show that it is double valued in its dependence on electronic stopping power. We propose that this is because the electronic sputtering yield is dominated by repulsion of ions in the ionization track of the projectile which, at low velocities, is augmented near the surface due to the additional ionization resulting from electron captures. This process may also be responsible for enhanced radiation damage in insulators, in particular in the production of fission tracks.
منابع مشابه
Stress-induced formation of high-density amorphous carbon thin films
Amorphous carbon films with high sp content were deposited by magnetron sputtering and intense argon ion plating. Above a compressive stress of 13 GPa a strong increase of the density of the carbon films is observed. We explain the increase of density by a stress-induced phase transition of sp configured carbon to sp configured carbon. Preferential sputtering of the sp component in the carbon f...
متن کاملAbnormal X-ray Emission from Insulators Bombarded with Low Energy Ions
M. Song, K. Mitsuishi, M. Takeguchi, K. Furuya, R. C. Birtcher High Voltage Electron Microscopy Station, National Institute for Materials Science, Sakura 3-13, Tsukuba, 305-0003 Japan Materials Science Division, Argonne National Laboratory, MSD/212, 9700 South Cass Avenue, Argonne, IL 60439-4838 ABSTRACT An abnormal phenomenon, low energy ion induced X-ray emission from insulators is reported a...
متن کاملعدم تقارن الکترون-حفره در کوپراتهای دمای بالا از دید نظری
Asymmetric features of various physical quantities in the normal and superconducting states between hole- and electron-doped cuprate high-temperature superconductors have been an issue of debate for a long time. Their exploration is very important for the understanding not only of the mechanism of high-Tc superconductivity but also of the nature of doped-Mott insulators. Presented in this rev...
متن کاملGas-Mediated Electron Beam Induced Etching – From Fundamental Physics to Device Fabrication
Gas-mediated electron beam induced etching (EBIE) is a nanoscale, direct-write technique analogous to gas-assisted focused ion beam (FIB) milling. The main advantage of EBIE is the elimination of sputtering and ion implantation during processing as well as greater material selectivity [1]. Here we discuss recent developments that expand the scope of EBIE applications in nanofabrication and defe...
متن کاملEffect of Thickness on Structural and Morphological Properties of AlN Films Prepared Using Single Ion Beam Sputtering
Aluminum nitride (AlN) thin films have potential applications in microelectronic and optoelectronic devices. In this study, AlN thin films with different thicknesses were deposited on silicon substrate by single ion beam sputtering method. The X-ray diffraction (XRD) spectra revealed that the structure of films with thickness of - nm was amorphous, while the polycrystalline hexagonal AlN with a...
متن کامل