Defect evolution and dopant activation in laser annealed Si and Ge

نویسندگان

  • F. Cristiano
  • M. Shayesteh
  • R. Duffy
  • K. Huet
  • F. Mazzamuto
  • Y. Qiu
  • H. H. Henrichsen
  • P. F. Nielsen
  • D. H. Petersen
  • G. Caruso
  • S. Boninelli
چکیده

Defect evolution and dopant activation are intimately related to the use of ion implantation and annealing, traditionally used to dope semiconductors during device fabrication. Ultra-fast laser thermal annealing (LTA) is one of the most promising solutions for the achievement of abrupt and highly doped junctions. In this paper, we report some recent investigations focused on this annealing method, with particular emphasis on the investigation of the formation and evolution of implant/anneal induced defects and their impact on dopant activation. In the case of laser annealed Silicon, we show that laser anneal favours the formation of “unconventional” (001) loops that, following non-melt anneals, act as carrier scattering centres, leading to carrier mobility degradation. In contrast, in the case of melt anneals, the molten region itself is of excellent crystalline quality, defect-free and with very high activation rates. As for laser annealed Germanium, we studied in detail the amorphous to crystalline Ge phase transition as a function of the increasing LTA energy density and we found that using LTA, very high carrier concentrations (above 10 cm ) were achieved in As doped regions, which are unachievable with conventional rapid thermal annealing (RTA) processes. & 2015 Elsevier Ltd. All rights reserved.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Vacancy - phosphorus complexes in strained Si 1 À x Ge x : Structure and stability

We have used positron annihilation spectroscopy to study vacancy-type defects in strained phosphorus doped Si12xGex layers grown on Si substrates and irradiated with 2-MeV protons. The results show that the dominant defect in the SiGe layer after irradiation is the E center, the vacancy-phosphorus pair. When the sample is annealed at 150–175 °C, the dominant defect species in the SiGe layer cha...

متن کامل

Influence of low temperature preanneals on dopant and defect behavior for low energy Ge preamorphized silicon

The hold temperature of an anneal plays a crucial role in controlling the final activation and diffusion of dopants. A study on the influence of a variety of low temperature preanneals on the behavior of dopants and defects for low energy germanium preamorphization is conducted. Si wafers are preamorphized with 1!1015 cm"2 Ge at energies of 10, 12, 15, 20, and 30 keV and implanted with 1!1015 c...

متن کامل

Diffusion and Defect Reactions in Isotopically Controlled Semiconductors

Point defects in semiconductors play a decisive role for the functionality of semiconductors. A detailed, quantitative understanding of diffusion and defect reactions of dopants is required for advanced modelling of modern nanometer size electronic devices. With isotope heterostructures which consist of epitaxial layers of isotopically pure and deliberately mixed stable isotopes, we have studie...

متن کامل

A Differential Hall Effect method with sub-nanometre resolution for active dopant concentration profiling in ultra-thin Si 1-x Ge x and Si doped layers

In this paper, we present an enhanced Differential Hall Effect method (DHE) for Si and SiGe ultrathin layers for the investigation of dopant activation in the surface region with sub-nanometre resolution. In the case of SiGe case, which constitutes the most challenging process, we show the reliability of the SC1 chemical solution (NH4OH:H2O2:H2O) thanks to its slow etch rate, stoichiometry cons...

متن کامل

Low-temperature dopant activation technology using elevated Ge-S/D structure

Dopant activation annealing of an elevated Ge-S/D structure formed on Si was investigated for application in advanced CMOSFET fabrication. Due to the low melting point of Ge, dopant activation was observed below 600 8C. However, the low temperature annealing process resulted in high reverse-bias p–n junction leakage. A thermal process budget of 900 8C, 60 s was found to be the minimum necessary...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2015