Model-Assisted Control of Flow Front in Resin Transfer Molding Based on Real-Time Estimation of Permeability/Porosity Ratio
نویسندگان
چکیده
Resin transfer molding (RTM) is a popular manufacturing technique that produces fiber reinforced polymer (FRP) composites. In this paper, a model-assisted flow front control system is developed based on real-time estimation of permeability/porosity ratio using the information acquired by a visualization system. In the proposed control system, a radial basis function (RBF) network meta-model is utilized to predict the position of the future flow front by inputting the injection pressure, the current position of flow front, and the estimated ratio. By conducting optimization based on the meta-model, the value of injection pressure to be implemented at each step is obtained. Moreover, a cascade control structure is established to further improve the control performance. Experiments show that the developed system successfully enhances the performance of flow front control in RTM. Especially, the cascade structure makes the control system robust to model mismatch.
منابع مشابه
Physical Determination of Permeability Variation With Porosity For Composite Performs
Abstract: This paper presents the results of experimental determination of fiber bed permeability variation with porosity. Flow measurement experiments were designed to measure fiber mat permeability for fiber beds with various fiber volume fractions. Woven fiberglass, chopped fiberglass, and carbon fiber mats were used as reinforcements. The effects of reinforcement type and porosity on fiber ...
متن کاملCapillary Effects on Surface Enhancement in a Non-Homogeneous Fibrous Porous Medium
The evaluation of a free fluid surface in a porous medium has several mathematical applications that are important in industries using molds, particularly in the fluid injection process. The vacuum-assisted resin transfer molding (VARTM) process is a promising technology in the primary composite industry. An accurate computational simulation of the VARTM process would be a cost-effective tool i...
متن کاملNumerical Modeling of Mold Filling and Curing in Non-Isothermal RTM Process (RESEARCH NOTE)
Resin Transfer Molding (RTM) is a composite manufacturing process. A preformed fiber is placed in a closed mold and a viscous resin is injected into the mold. In this paper, a model is developed to predict the flow pattern, extent of reaction and temperature change during filling and curing in a thin rectangular mold. A numerical simulation is presented to predict the free surface and its inter...
متن کاملNormal and Parallel Permeability of Preform Composite Materials used in Liquid Molding Processes: Analytical Solution
The permeability of the preform composite materials used in liquid molding processes such as resin transfer molding and structural reaction injection molding is a complex function of weave pattern and packing characteristics. The development of tools for predicting permeability as a function of these parameters is of great industrial importance. Such capability would speed process design and op...
متن کاملA Physical-based Model of Permeability/Porosity Relationship for the Rock Data of Iran Southern Carbonate Reservoirs
The prediction of porosity is achieved by using available core and log data; however, the estimation of permeability is limited to the scare core data. Hence, porosity and saturation data through the framework of flow units can be used to make an estimation of reservoir permeability. The purpose of this study is to predict the permeability of a carbonate gas reservoir by using physical-based em...
متن کامل