Design and Modeling of Microstrip Line to Substrate Integrated Waveguide Transitions
نویسنده
چکیده
Microstrip lines (MSL) are widely used in microwave systems because of its low cost, light weight, and easy integration with other components. Substrate integrated waveguides (SIW), which inherit the advantages from traditional rectangular waveguides without their bulky configuration, aroused recently in low loss and high power planar applications. This chapter proposed the design and modeling of transitions between these two common structures. Research motives will be described firstly in the next subsection, followed by a literature survey on the proposed MSL to SIW transition structures. Outlines of the following sections in this chapter will also be given in the end of this section.
منابع مشابه
Design Investigation of Microstrip Patch and Half-Mode Substrate Integrated Waveguide Cavity Hybrid Antenna Arrays
In this paper two linear arrays including a linear 1×4 and a planar 2×2 of microstrip patch and half-mode substrate integrated waveguide (SIW) cavity hybrid antenna are introduced and investigated. These are simply implemented using low cost single layer printed circuit board (PCB) process. The array element consists of a rectangular microstrip patch with appropriate dimensions in the vicinity ...
متن کاملWLAN Substrate Integrated Waveguide Filter with Novel Negative Coupling Structure
A fourth-degree Substrate Integrated Waveguide (SIW) crossed coupled band pass filter for WLAN band is designed by using a new negative coupling structure. It consists of two U shape microstrip lines on top and bottom planes with via holes at the center of them. This paper investigates the phase characteristics of negative and positive coupling structures and their effects. The design, fabricat...
متن کاملFiltering Power Divider/Combiner Based on Half Mode Substrate Integrated Waveguide (HMSIW) Technology for High Power Applications
A filtering power divider/power combiner based on half mode substrate integrated waveguide technology for high power applications is proposed. This design includes one half mode substrate integrated waveguide cavity, one matched load, and four sections of quarter-wavelength transmission lines. The high isolation between output ports is obtained by combining the half mode substrate integrated wa...
متن کاملFour-Way Substrate Integrated Waveguide (SIW) Power Divider/Combiner for High Power Applications
A four-way power divider/power combiner using substrate integrated waveguide (SIW) and microstrip lines is proposed and investigated. The proposed power divider consists of a double-layer substrate with a bottom layer including an SIW T-junction and a top layer including a microstrip network. This microstrip network consists of a modified Gysel power divider which provides a high isolation betw...
متن کاملSubstrate Integrated Waveguide (SIW) to Microstrip Transition at X-Band
Substrate integrated waveguide (SIW) is a new form of transmission line. It facilitates the realization of nonplanar (waveguide based) circuits into planar form for easy integration with other planar (microstrip) circuits and systems. This paper describes the design of an SIW to microstrip transition. The transition is broadband covering the frequency range of 8 – 12GHz. The measured in-band in...
متن کامل