Comparison of Wide Bandgap Semiconductors for Power Applications
نویسندگان
چکیده
Recent development advances have allowed silicon (Si) semiconductor technology to approach the theoretical limits of the Si material; however, power device requirements for many applications are at a point that the present Si-based power devices can not handle. The requirements include higher blocking voltages, switching frequencies, efficiency, and reliability. To overcome these limitations, new semiconductor materials for power device applications are needed. For high power requirements, wide band gap semiconductors like silicon carbide (SiC), gallium nitride (GaN), and diamond with their superior electrical properties are likely candidates to replace Si in the near future. This paper compares all the aforementioned wide bandgap semiconductors with respect to their promise and applicability for power applications and predicts the future of power device semiconductor materials.
منابع مشابه
State of the Art 2D and 3D Process and Device Simulation of GaN-Based Devices
Introduction Silicon has long been the semiconductor of choice for high-voltage power electronics applications. However, wide-bandgap semiconductors such as SiC and GaN have begun to attract attention because they are projected to have much better performance than silicon. In comparison with silicon, wide-bandgap semiconductors offer a lower intrinsic carrier concentration, a higher electric br...
متن کاملWide Bandgap Semiconductors for Utility Applications
Recent development advances have allowed silicon (Si) semiconductor technology to approach the theoretical limits of the Si material; however, power device requirements for many utility applications of power electronics are at a point that the present Si-based power devices cannot handle. The requirements include higher blocking voltages, switching frequencies, efficiency, and reliability. To o...
متن کاملSustained hole inversion layer in a wide-bandgap metal-oxide semiconductor with enhanced tunnel current
Wide-bandgap, metal-oxide thin-film transistors have been limited to low-power, n-type electronic applications because of the unipolar nature of these devices. Variations from the n-type field-effect transistor architecture have not been widely investigated as a result of the lack of available p-type wide-bandgap inorganic semiconductors. Here, we present a wide-bandgap metal-oxide n-type semic...
متن کاملSilicon Carbide Gto Thyristor Loss Model for Hvdc Application
With the increase in use of power electronics in transmission and distribution applications there is a growing demand for cost effective and highly efficient converters. Most of the utility applications have power electronics integrated in the system to improve the efficiency and functionality of the existing system. The development of semiconductor devices is vital for the growth of power elec...
متن کاملComparison of Semiconducting Behavior and Optical Properties of Oxyfluoride Glasses of SiO2-Al2O3-BaF2 and SiO2-Al2O3-CaF2 Systems
Amorphous semiconductors are materials with a brilliant prospect for a wide range of optical applications like solar cells, optical sensors, optical devices, and memories. The purpose of the present research was to study the semiconducting optical properties of SiO2-Al2O3-CaF2 and SiO2-Al2O3-BaF2 oxyfluoride...
متن کامل