Analysis of Buckling Phenomenon under Different Loadings in Circular and Rectangular Plates
نویسنده
چکیده
In this paper, buckling of the plates is investigated with different boundary conditions and alternating and axial compressive loadings by theoretical approach and numerical analysis with circular and rectangular closed sectional plates. In this research, governing differential equation will be used for thin plates under lateral and direct alternating loadings. Next, the mentioned equation would be solved with assumption of deflection functions by analytical method. Accordingly, the minimum critical buckling loads are determined by two approaches such as analytical and numerical methods. These analytical results are then validated by the numerical modeling. Interestingly, good agreements are found between the analytical and numerical predictions for the critical buckling loads.
منابع مشابه
Investigation of Pre-buckling Stress Effect on Buckling Load Determination of Finite Rectangular Plates with Circular Cutout
This paper investigates the buckling of finite isotropic rectangular plates with circular cutout under uniaxial and biaxial loading. The complex potential method is used to calculate the pre-buckling stress distribution around the cutout in the plate with finite dimensions. To satisfy the in-plane boundary conditions, the generalized complex-potential functions are introduced and a new method b...
متن کاملBuckling Analysis of Orthotropic and Anisotropic Rectangular Plates by GDQ Method
In this paper, buckling of orthotropic rectangular plates under different loadings was investigated. For this reason, governing buckling equations for an isotropic plate were modified by applying constitutive equations of orthotropic materials. After obtaining the equations of orthotropic plates, Generalized Differential Quadrature method (GDQM) was applied on buckling equations and thus a set ...
متن کاملBuckling Analysis of Orthotropic and Anisotropic Rectangular Plates by GDQ Method
In this paper, buckling of orthotropic rectangular plates under different loadings was investigated. For this reason, governing buckling equations for an isotropic plate were modified by applying constitutive equations of orthotropic materials. After obtaining the equations of orthotropic plates, Generalized Differential Quadrature method (GDQM) was applied on buckling equations and thus a set ...
متن کاملNumerical and Experimental Study of Buckling of Rectangular Steel Plates with a Cutout
Steel plates are used in various structures, such as the structures of the deck and body of ships, bridges, and aerospace industry. In this study, we investigate the buckling and post-buckling behavior of rectangular steel plates having circular cutouts with two boundary conditions: first, clamped supports at upper and lower ends and free supports at other edges; second, clamped supports at upp...
متن کاملBuckling Analysis of Rectangular Laminated Composite Plates With An Edge Delamination Under Compressive Load
The buckling analysis of rectangular laminated composite plates with an edge delamination under in-plane compressive loading is performed using the finite element method. Such a plate may be considered as a simplified model of stiffener plates of a stiffened panel. The buckling load and buckling mode are obtained by solving an eigenproblem. In an unconstrained analysis, physically inadmissible ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2012