Development of a vertical optical coupler using a slanted etching of InP/InGaAsP waveguide

نویسندگان

  • Sunghan Choi
  • Akio Higo
  • Masaru Zaitsu
  • Myung-Joon Kwack
  • Masakazu Sugiyama
  • Hiroshi Toshiyoshi
  • Yoshiaki Nakano
چکیده

We demonstrate a simple and efficient optical coupler for vertical coupling between optical fibers and InP-based waveguides using a slant-etched mirror. The angle of the etched mirror can be controlled by using an aluminum jig with a beveled surface inserted under the substrate during RIE (reactive ion etching) of InP/InGaAsP. The offchip coupler is fabricated simultaneously with a high-mesa waveguide with only one etching process. Coupling loss of 7.3 dB between the tapered single-mode fibers is obtained within the wavelength of 1530– 1570 nm.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Compact Slanted Grating Couplers Between Optical Fiber and InP–InGaAsP Waveguides

We present theoretical and experimental results for compact slanted gratings for vertical coupling between single-mode fiber and InP–InGaAsP waveguides. The maximum calculated coupling efficiency is 59%. We have measured a coupling efficiency of 16% for a 10m-long slanted grating.

متن کامل

Design of a new asymmetric waveguide in InP-Based multi-quantum well laser

Today, electron leakage in InP-based separate confinement laser diode has a serious effect on device performance. Control of electron leakage current is the aim of many studies in semiconductor laser industry. In this study, for the first time, a new asymmetric waveguide structure with n-interlayer for a 1.325 μm InP-based laser diode with InGaAsP multi-quantum well is proposed and theoreticall...

متن کامل

Design of Photonic Crystal Polarization Splitter on InP Substrate

In this article, we suggested a novel design of polarization splitter based on coupler waveguide on InP substrate at 1.55mm wavelength. Photonic crystal structure is consisted of two dimensional (2D) air holes embedded in InP/InGaAsP material with an effective refractive index of 3.2634 which is arranged in a hexagonal lattice. The photonic band gap (PBG) of this structure is determined using t...

متن کامل

Analysis of InGaAsP-InP Double Microring Resonator using Signal Flow Graph Method

The buried hetero-structure (BH) InGaAsP-InP waveguide is used for asystem of double microring resonators (DMR). The light transmission and location ofresonant peaks are determined for six different sets of ring radii with different ordermode numbers. The effect of changing middle coupling coefficient on the box likeresponse is studied. It is found that the surge of coupling coefficient to the ...

متن کامل

Cecom - Tr - 92 - B 007 - F a Cascadable , Monolithic Laser / Modulator / Amplifier Transmitter

A. 13-tan wavelength, InGaAsP-InP folded-cavity, siirface-emitting laser with CH4-H2 reactive ion-etched vertical and 45° angled facets was demonstrated for the first time. Continnoos-wave threshold currents of 32 mA have been achieved, with >15 mW CW power for the surface-emitted light These surface-emitting lasers with two dry-etched facets are suitable for wafer-level -esüng and for monolith...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • IEICE Electronic Express

دوره 10  شماره 

صفحات  -

تاریخ انتشار 2013