The Apollonian Decay of Beer Foam Bubble Size Distribution and the Lattices of Young Diagrams and Their Correlated Mixing Functions

نویسندگان

  • S. SAUERBREI
  • E. C. Haß
  • P. J. PLATH
چکیده

We present different methods to characterise the decay of beer foam by measuring the foam heights and recording foam images as a function of time. It turns out that the foam decay does not follow a simple exponential law but a higher-order equation lnV(t) = a− bt− ct2.5, which can be explained as a superposition of two processes, that is, drainage and bubble rearrangement. The reorganisation of bubbles leads to the structure of an Apollonian gasket with a fractal dimension of D ≈ 1.3058. Starting from foam images, we study the temporal development of bubble size distributions and give a model for the evolution towards the equilibrium state based upon the idea of Ernst Ruch to describe irreversible processes by lattices of Young diagrams. These lattices generally involve a partial order, but one can force a total order by mapping the diagrams onto the interval [0,1] using ordering functions such as the Shannon entropy. Several entropy-like and nonentropy-like mixing functions are discussed in comparison with the Young order, each of them giving a special prejudice for understanding the process of structure formation during beer foam decay.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Mini-emulsion preparation, kinetics of reaction and physical properties of acrylic terpolymer lattices

In this study, stable lattices of terpolymer butyl acrylate, methyl methacrylate, and styrene were synthesized by a mini-emulsion polymerization technique using tert-butyl hydroperoxide TBHP/Fe2 /ethylenediaminetetraacetic acid/sodium formaldehyde sulfoxylate redox initiators at room temperature, and the kinetics of the reaction were studied. The reaction rate was obtained from periodic samplin...

متن کامل

Compressibility and Foaming behavior of steel slag/waste glass compositesby particle size distribution and foam agents

In present research, the foam glass-ceramic composites fabricated by window glass, steel slag and SiC, CaCO3 foaming agents were investigated by press–sintering method. The optimum sintering temperature was obtained at 1200°C with a 3-minutes holding time and 20°C/min heating rate. The optimum pressure level of 80 MPa for achieving the 70 % of relative density was selected. The effec...

متن کامل

Performance of Air Foam Flooding under Low Frequency Vibration

Foam injection is widely applied in amounts of fields to drilling, production, and formation protection. Sometimes, the application result is disappointing, which is caused by the failure of bubble generation in foam flooding. Therefore, it is necessary to seek ways for improving the performance of foam injection. An increased disturbance to the stratum, like the vibration caused by a seismic o...

متن کامل

A New Approach for Determination of Neck-Pore Size Distribution of Porous Membranes via Bubble Point Data

Reliable estimation of the porous membranes neck-pore size distribution (NPSD) is the key element in the design and operation of all membrane separation processes. In this paper, a new approach is presented for reliable of NPSD of porous membranes using wet flow-state bubble point test data. For this purpose, a robust method based on the linear regularization theory is developed to extract NPSD...

متن کامل

Effects of Height to Diameter Ratio and Aeration rate on Liquid Mixing and Hydrodynamic Properties in a Bubble Column

"> Experimental measurements of overall gas holdup (εg<span style="font-family: TimesNewRomanPS-ItalicMT; font-size: 10pt; c...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2006