The KUKA Control Toolbox : motion control of KUKA robot manipulators with MATLAB
نویسندگان
چکیده
The KUKA Control Toolbox (KCT) is a collection of MATLAB functions developed at the University of Siena, for motion control of KUKA robot manipulators. The toolbox, which is compatible with all 6 DOF small and low-payload KUKA robots that use the Eth.RSIXML, runs on a remote computer connected with the KUKA controller via TCP/IP. KCT includes more than 40 functions, spanning operations such as forward and inverse kinematics computation, point-to-point joint and Cartesian control, trajectory generation, graphical display, 3-D animation and diagnostics. Applicative examples show the flexibility of KCT and its easy interfacing with other toolboxes and external devices.
منابع مشابه
KUKA Sunrise Toolbox: Interfacing Collaborative Robots with MATLAB
Collaborative robots are increasingly present in our lives. The KUKA LBR iiwa equipped with the KUKA Sunrise.OS controller is a good example of a collaborative/sensitive robot. This paper presents a MATLAB Toolbox, the KUKA Sunrise Toolbox (KST), to interface KUKA Sunrise.OS using MATLAB. The KST contains functionalities for networking, real-time control, point-to-point motion, setters and gett...
متن کاملRobotic Ultrasound Needle Placement and Tracking: Robot-to-Robot Calibration
In medicine and industry, there is a need for flexible multirobot platforms that allow for independent placement of multiple robotic manipulators. The Computer Aided Medical Procedures research group at Johns Hopkins University has developed a multi-robot surgical platform with two KUKA iiwa robotic manipulators. Each KUKA system is built into a mobile workstation, which makes them easy to tran...
متن کاملRobotic path planning for non-destructive testing – A custom MATLAB toolbox approach
The requirement to increase inspection speeds for non-destructive testing (NDT) of composite aerospace parts is common to many manufacturers. The prevalence of complex curved surfaces in the industry provides motivation for the use of 6 axis robots in these inspections. The purpose of this paper is to present work undertaken for the development of a KUKA robot manipulator based automated NDT sy...
متن کاملRobust Hybrid Motion Force Control Algorithm for Robot Manipulators
In this paper we present a robust hybrid motion/force controller for rigid robot manipulators. The main contribution of this paper is that the proposed hybrid control system is able to accomplish motion objectives in free directions and force objectives in constrained directions under parametric uncertainty both in robot dynamics and stiffness constraint constant. Also, the given scheme is prov...
متن کاملUnified Closed Form Inverse Kinematics for the KUKA youBot
Mobile manipulators are of high interest to industry because of the increased flexibility and effectiveness they offer. The combination and coordination of the mobility provided by a mobile platform and of the manipulation capabilities provided by a robot arm leads to complex analytical problems for research. These problems can be studied very well on the KUKA youBot, a mobile manipulator desig...
متن کامل