Additive-Assisted Aqueous Synthesis of BaTiO3 Nanopowders
نویسندگان
چکیده
The effect of poly(acrylic acid) (PAA), poly(vinylpyrrolidone) (PVP), sodium dodecylsulfate (SDS), hydroxypropylmethylcellulose (HPMC), and D-fructose additives on the growth of BaTiO3 particles by aqueous synthesis is studied. Through different mechanisms, all the tested additives influenced the growth of BaTiO3. For high concentrations, PAA adsorbed on specific crystallographic faces changing the growth kinetics and inducing the oriented attachment of the particles acting as a crystal growth modifier. PVP, SDS, andHPMCbehave as growth inhibitors rather than crystal habit modifiers, and barium titanate crystals as small as 26 nm were obtained. D-Fructose appeared to increase the activation energy for barium titanate nucleation when the additive concentration increases. The present study gives new insights into how additives control barium titanate particle growth in aqueous media.
منابع مشابه
Synthesis of hollow cobalt oxide nanopowders by a salt-assisted spray pyrolysis process applying nanoscale Kirkendall diffusion and their electrochemical properties.
A new concept for preparing hollow metal oxide nanopowders by salt-assisted spray pyrolysis applying nanoscale Kirkendall diffusion is introduced. The composite powders of metal oxide and indecomposable metal salt are prepared by spray pyrolysis. Post-treatment under a reducing atmosphere and subsequent washing using distilled water produce aggregation-free metal nanopowders. The metal nanopowd...
متن کاملTemperature-mediated phase transformation, pore geometry and pore hysteresis transformation of borohydride derived in-born porous zirconium hydroxide nanopowders
Development of in-born porous nature of zirconium hydroxide nanopowders through a facile hydrogen (H2) gas-bubbles assisted borohydride synthesis route using sodium borohydride (NaBH4) and novel information on the temperature-mediated phase transformation, pore geometry as well as pore hysteresis transformation of in-born porous zirconium hydroxide nanopowders with the help of X-ray diffraction...
متن کاملSolution based approaches for the morphology control of BaTiO3 particulates
Within the action COST 539 ELENA our contribution was aimed at studying solution based approaches for the morphology control of BaTiO3 particulates. Initially, our kinetic analysis and systematic structural and morphological studies, demonstrated that during hydrothermal synthesis from layered titanate nanotubes (TiNTS), BaTiO3 forms via two mechanisms depending on the temperature and time. At ...
متن کاملSynthesis of nanocrystalline BaTiO3 ceramics via hydrothermal condition and structural characterization by HRTEM and SAED
In the present work, we report a suitable approach for the preparation of BaTiO3 nanostructures via the hydrothermal condition using Dolapix ET85 as surfactant. The powders were investigated by X-ray diffraction (XRD), scanning election microscopy (SEM), energy-dispersive X-ray spectroscopy (EDAX), field emission transmission electron microscopy (FETEM), selected area electron diffra...
متن کاملThe Effects and Interactions of Synthesis Parameters on Properties of Mg Substituted Hydroxyapatite
In this study, the effects and interactions of reaction time and capping agent assistance during sol-gel synthesis of magnesium substituted hydroxyapatite nanopowder (MgHA) on hydroxyapatite (HA) to β-tricalcium phosphate (β-TCP) ratio, Ca/P ratio and mean crystallite size was examined experimentally as well as through statistical analysis. MgHA nanopowders were synthesized by sol-gel technique...
متن کامل